Your IP : 216.73.217.110
/*
* Copyright (c) 2009-2012, Salvatore Sanfilippo <antirez at gmail dot com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Redis nor the names of its contributors may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __REDIS_H
#define __REDIS_H
#include "fmacros.h"
#include "config.h"
#include "solarisfixes.h"
#include "rio.h"
#include "atomicvar.h"
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <limits.h>
#include <unistd.h>
#include <errno.h>
#include <inttypes.h>
#include <pthread.h>
#include <syslog.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <lua.h>
#include <signal.h>
#include "hdr_histogram.h"
#ifdef HAVE_LIBSYSTEMD
#include <systemd/sd-daemon.h>
#endif
#ifndef static_assert
#define static_assert(expr, lit) extern char __static_assert_failure[(expr) ? 1:-1]
#endif
typedef long long mstime_t; /* millisecond time type. */
typedef long long ustime_t; /* microsecond time type. */
#include "ae.h" /* Event driven programming library */
#include "sds.h" /* Dynamic safe strings */
#include "dict.h" /* Hash tables */
#include "adlist.h" /* Linked lists */
#include "zmalloc.h" /* total memory usage aware version of malloc/free */
#include "anet.h" /* Networking the easy way */
#include "ziplist.h" /* Compact list data structure */
#include "intset.h" /* Compact integer set structure */
#include "version.h" /* Version macro */
#include "util.h" /* Misc functions useful in many places */
#include "latency.h" /* Latency monitor API */
#include "sparkline.h" /* ASCII graphs API */
#include "quicklist.h" /* Lists are encoded as linked lists of
N-elements flat arrays */
#include "rax.h" /* Radix tree */
#include "connection.h" /* Connection abstraction */
#define REDISMODULE_CORE 1
#include "redismodule.h" /* Redis modules API defines. */
/* Following includes allow test functions to be called from Redis main() */
#include "zipmap.h"
#include "sha1.h"
#include "endianconv.h"
#include "crc64.h"
/* min/max */
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
/* Error codes */
#define C_OK 0
#define C_ERR -1
/* Static server configuration */
#define CONFIG_DEFAULT_HZ 10 /* Time interrupt calls/sec. */
#define CONFIG_MIN_HZ 1
#define CONFIG_MAX_HZ 500
#define MAX_CLIENTS_PER_CLOCK_TICK 200 /* HZ is adapted based on that. */
#define CRON_DBS_PER_CALL 16
#define NET_MAX_WRITES_PER_EVENT (1024*64)
#define PROTO_SHARED_SELECT_CMDS 10
#define OBJ_SHARED_INTEGERS 10000
#define OBJ_SHARED_BULKHDR_LEN 32
#define OBJ_SHARED_HDR_STRLEN(_len_) (((_len_) < 10) ? 4 : 5) /* see shared.mbulkhdr etc. */
#define LOG_MAX_LEN 1024 /* Default maximum length of syslog messages.*/
#define AOF_REWRITE_ITEMS_PER_CMD 64
#define AOF_ANNOTATION_LINE_MAX_LEN 1024
#define CONFIG_AUTHPASS_MAX_LEN 512
#define CONFIG_RUN_ID_SIZE 40
#define RDB_EOF_MARK_SIZE 40
#define CONFIG_REPL_BACKLOG_MIN_SIZE (1024*16) /* 16k */
#define CONFIG_BGSAVE_RETRY_DELAY 5 /* Wait a few secs before trying again. */
#define CONFIG_DEFAULT_PID_FILE "/var/run/redis.pid"
#define CONFIG_DEFAULT_BINDADDR_COUNT 2
#define CONFIG_DEFAULT_BINDADDR { "*", "-::*" }
#define NET_HOST_STR_LEN 256 /* Longest valid hostname */
#define NET_IP_STR_LEN 46 /* INET6_ADDRSTRLEN is 46, but we need to be sure */
#define NET_ADDR_STR_LEN (NET_IP_STR_LEN+32) /* Must be enough for ip:port */
#define NET_HOST_PORT_STR_LEN (NET_HOST_STR_LEN+32) /* Must be enough for hostname:port */
#define CONFIG_BINDADDR_MAX 16
#define CONFIG_MIN_RESERVED_FDS 32
#define CONFIG_DEFAULT_PROC_TITLE_TEMPLATE "{title} {listen-addr} {server-mode}"
/* Bucket sizes for client eviction pools. Each bucket stores clients with
* memory usage of up to twice the size of the bucket below it. */
#define CLIENT_MEM_USAGE_BUCKET_MIN_LOG 15 /* Bucket sizes start at up to 32KB (2^15) */
#define CLIENT_MEM_USAGE_BUCKET_MAX_LOG 33 /* Bucket for largest clients: sizes above 4GB (2^32) */
#define CLIENT_MEM_USAGE_BUCKETS (1+CLIENT_MEM_USAGE_BUCKET_MAX_LOG-CLIENT_MEM_USAGE_BUCKET_MIN_LOG)
#define ACTIVE_EXPIRE_CYCLE_SLOW 0
#define ACTIVE_EXPIRE_CYCLE_FAST 1
/* Children process will exit with this status code to signal that the
* process terminated without an error: this is useful in order to kill
* a saving child (RDB or AOF one), without triggering in the parent the
* write protection that is normally turned on on write errors.
* Usually children that are terminated with SIGUSR1 will exit with this
* special code. */
#define SERVER_CHILD_NOERROR_RETVAL 255
/* Reading copy-on-write info is sometimes expensive and may slow down child
* processes that report it continuously. We measure the cost of obtaining it
* and hold back additional reading based on this factor. */
#define CHILD_COW_DUTY_CYCLE 100
/* Instantaneous metrics tracking. */
#define STATS_METRIC_SAMPLES 16 /* Number of samples per metric. */
#define STATS_METRIC_COMMAND 0 /* Number of commands executed. */
#define STATS_METRIC_NET_INPUT 1 /* Bytes read to network .*/
#define STATS_METRIC_NET_OUTPUT 2 /* Bytes written to network. */
#define STATS_METRIC_COUNT 3
/* Protocol and I/O related defines */
#define PROTO_IOBUF_LEN (1024*16) /* Generic I/O buffer size */
#define PROTO_REPLY_CHUNK_BYTES (16*1024) /* 16k output buffer */
#define PROTO_INLINE_MAX_SIZE (1024*64) /* Max size of inline reads */
#define PROTO_MBULK_BIG_ARG (1024*32)
#define PROTO_RESIZE_THRESHOLD (1024*32) /* Threshold for determining whether to resize query buffer */
#define PROTO_REPLY_MIN_BYTES (1024) /* the lower limit on reply buffer size */
#define REDIS_AUTOSYNC_BYTES (1024*1024*4) /* Sync file every 4MB. */
#define REPLY_BUFFER_DEFAULT_PEAK_RESET_TIME 5000 /* 5 seconds */
/* When configuring the server eventloop, we setup it so that the total number
* of file descriptors we can handle are server.maxclients + RESERVED_FDS +
* a few more to stay safe. Since RESERVED_FDS defaults to 32, we add 96
* in order to make sure of not over provisioning more than 128 fds. */
#define CONFIG_FDSET_INCR (CONFIG_MIN_RESERVED_FDS+96)
/* OOM Score Adjustment classes. */
#define CONFIG_OOM_MASTER 0
#define CONFIG_OOM_REPLICA 1
#define CONFIG_OOM_BGCHILD 2
#define CONFIG_OOM_COUNT 3
extern int configOOMScoreAdjValuesDefaults[CONFIG_OOM_COUNT];
/* Hash table parameters */
#define HASHTABLE_MIN_FILL 10 /* Minimal hash table fill 10% */
#define HASHTABLE_MAX_LOAD_FACTOR 1.618 /* Maximum hash table load factor. */
/* Command flags. Please check the definition of struct redisCommand in this file
* for more information about the meaning of every flag. */
#define CMD_WRITE (1ULL<<0)
#define CMD_READONLY (1ULL<<1)
#define CMD_DENYOOM (1ULL<<2)
#define CMD_MODULE (1ULL<<3) /* Command exported by module. */
#define CMD_ADMIN (1ULL<<4)
#define CMD_PUBSUB (1ULL<<5)
#define CMD_NOSCRIPT (1ULL<<6)
#define CMD_BLOCKING (1ULL<<8) /* Has potential to block. */
#define CMD_LOADING (1ULL<<9)
#define CMD_STALE (1ULL<<10)
#define CMD_SKIP_MONITOR (1ULL<<11)
#define CMD_SKIP_SLOWLOG (1ULL<<12)
#define CMD_ASKING (1ULL<<13)
#define CMD_FAST (1ULL<<14)
#define CMD_NO_AUTH (1ULL<<15)
#define CMD_MAY_REPLICATE (1ULL<<16)
#define CMD_SENTINEL (1ULL<<17)
#define CMD_ONLY_SENTINEL (1ULL<<18)
#define CMD_NO_MANDATORY_KEYS (1ULL<<19)
#define CMD_PROTECTED (1ULL<<20)
#define CMD_MODULE_GETKEYS (1ULL<<21) /* Use the modules getkeys interface. */
#define CMD_MODULE_NO_CLUSTER (1ULL<<22) /* Deny on Redis Cluster. */
#define CMD_NO_ASYNC_LOADING (1ULL<<23)
#define CMD_NO_MULTI (1ULL<<24)
#define CMD_MOVABLE_KEYS (1ULL<<25) /* populated by populateCommandMovableKeys */
#define CMD_ALLOW_BUSY ((1ULL<<26))
#define CMD_MODULE_GETCHANNELS (1ULL<<27) /* Use the modules getchannels interface. */
/* Command flags that describe ACLs categories. */
#define ACL_CATEGORY_KEYSPACE (1ULL<<0)
#define ACL_CATEGORY_READ (1ULL<<1)
#define ACL_CATEGORY_WRITE (1ULL<<2)
#define ACL_CATEGORY_SET (1ULL<<3)
#define ACL_CATEGORY_SORTEDSET (1ULL<<4)
#define ACL_CATEGORY_LIST (1ULL<<5)
#define ACL_CATEGORY_HASH (1ULL<<6)
#define ACL_CATEGORY_STRING (1ULL<<7)
#define ACL_CATEGORY_BITMAP (1ULL<<8)
#define ACL_CATEGORY_HYPERLOGLOG (1ULL<<9)
#define ACL_CATEGORY_GEO (1ULL<<10)
#define ACL_CATEGORY_STREAM (1ULL<<11)
#define ACL_CATEGORY_PUBSUB (1ULL<<12)
#define ACL_CATEGORY_ADMIN (1ULL<<13)
#define ACL_CATEGORY_FAST (1ULL<<14)
#define ACL_CATEGORY_SLOW (1ULL<<15)
#define ACL_CATEGORY_BLOCKING (1ULL<<16)
#define ACL_CATEGORY_DANGEROUS (1ULL<<17)
#define ACL_CATEGORY_CONNECTION (1ULL<<18)
#define ACL_CATEGORY_TRANSACTION (1ULL<<19)
#define ACL_CATEGORY_SCRIPTING (1ULL<<20)
/* Key-spec flags *
* -------------- */
/* The following refer what the command actually does with the value or metadata
* of the key, and not necessarily the user data or how it affects it.
* Each key-spec may must have exactly one of these. Any operation that's not
* distinctly deletion, overwrite or read-only would be marked as RW. */
#define CMD_KEY_RO (1ULL<<0) /* Read-Only - Reads the value of the key, but
* doesn't necessarily returns it. */
#define CMD_KEY_RW (1ULL<<1) /* Read-Write - Modifies the data stored in the
* value of the key or its metadata. */
#define CMD_KEY_OW (1ULL<<2) /* Overwrite - Overwrites the data stored in
* the value of the key. */
#define CMD_KEY_RM (1ULL<<3) /* Deletes the key. */
/* The following refer to user data inside the value of the key, not the metadata
* like LRU, type, cardinality. It refers to the logical operation on the user's
* data (actual input strings / TTL), being used / returned / copied / changed,
* It doesn't refer to modification or returning of metadata (like type, count,
* presence of data). Any write that's not INSERT or DELETE, would be an UPDATE.
* Each key-spec may have one of the writes with or without access, or none: */
#define CMD_KEY_ACCESS (1ULL<<4) /* Returns, copies or uses the user data from
* the value of the key. */
#define CMD_KEY_UPDATE (1ULL<<5) /* Updates data to the value, new value may
* depend on the old value. */
#define CMD_KEY_INSERT (1ULL<<6) /* Adds data to the value with no chance of
* modification or deletion of existing data. */
#define CMD_KEY_DELETE (1ULL<<7) /* Explicitly deletes some content
* from the value of the key. */
/* Other flags: */
#define CMD_KEY_NOT_KEY (1ULL<<8) /* A 'fake' key that should be routed
* like a key in cluster mode but is
* excluded from other key checks. */
#define CMD_KEY_INCOMPLETE (1ULL<<9) /* Means that the keyspec might not point
* out to all keys it should cover */
#define CMD_KEY_VARIABLE_FLAGS (1ULL<<10) /* Means that some keys might have
* different flags depending on arguments */
/* Key flags for when access type is unknown */
#define CMD_KEY_FULL_ACCESS (CMD_KEY_RW | CMD_KEY_ACCESS | CMD_KEY_UPDATE)
/* Channel flags share the same flag space as the key flags */
#define CMD_CHANNEL_PATTERN (1ULL<<11) /* The argument is a channel pattern */
#define CMD_CHANNEL_SUBSCRIBE (1ULL<<12) /* The command subscribes to channels */
#define CMD_CHANNEL_UNSUBSCRIBE (1ULL<<13) /* The command unsubscribes to channels */
#define CMD_CHANNEL_PUBLISH (1ULL<<14) /* The command publishes to channels. */
/* AOF states */
#define AOF_OFF 0 /* AOF is off */
#define AOF_ON 1 /* AOF is on */
#define AOF_WAIT_REWRITE 2 /* AOF waits rewrite to start appending */
/* AOF return values for loadAppendOnlyFile() */
#define AOF_OK 0
#define AOF_NOT_EXIST 1
#define AOF_EMPTY 2
#define AOF_OPEN_ERR 3
#define AOF_FAILED 4
#define AOF_TRUNCATED 5
/* Command doc flags */
#define CMD_DOC_NONE 0
#define CMD_DOC_DEPRECATED (1<<0) /* Command is deprecated */
#define CMD_DOC_SYSCMD (1<<1) /* System (internal) command */
/* Client flags */
#define CLIENT_SLAVE (1<<0) /* This client is a replica */
#define CLIENT_MASTER (1<<1) /* This client is a master */
#define CLIENT_MONITOR (1<<2) /* This client is a slave monitor, see MONITOR */
#define CLIENT_MULTI (1<<3) /* This client is in a MULTI context */
#define CLIENT_BLOCKED (1<<4) /* The client is waiting in a blocking operation */
#define CLIENT_DIRTY_CAS (1<<5) /* Watched keys modified. EXEC will fail. */
#define CLIENT_CLOSE_AFTER_REPLY (1<<6) /* Close after writing entire reply. */
#define CLIENT_UNBLOCKED (1<<7) /* This client was unblocked and is stored in
server.unblocked_clients */
#define CLIENT_SCRIPT (1<<8) /* This is a non connected client used by Lua */
#define CLIENT_ASKING (1<<9) /* Client issued the ASKING command */
#define CLIENT_CLOSE_ASAP (1<<10)/* Close this client ASAP */
#define CLIENT_UNIX_SOCKET (1<<11) /* Client connected via Unix domain socket */
#define CLIENT_DIRTY_EXEC (1<<12) /* EXEC will fail for errors while queueing */
#define CLIENT_MASTER_FORCE_REPLY (1<<13) /* Queue replies even if is master */
#define CLIENT_FORCE_AOF (1<<14) /* Force AOF propagation of current cmd. */
#define CLIENT_FORCE_REPL (1<<15) /* Force replication of current cmd. */
#define CLIENT_PRE_PSYNC (1<<16) /* Instance don't understand PSYNC. */
#define CLIENT_READONLY (1<<17) /* Cluster client is in read-only state. */
#define CLIENT_PUBSUB (1<<18) /* Client is in Pub/Sub mode. */
#define CLIENT_PREVENT_AOF_PROP (1<<19) /* Don't propagate to AOF. */
#define CLIENT_PREVENT_REPL_PROP (1<<20) /* Don't propagate to slaves. */
#define CLIENT_PREVENT_PROP (CLIENT_PREVENT_AOF_PROP|CLIENT_PREVENT_REPL_PROP)
#define CLIENT_PENDING_WRITE (1<<21) /* Client has output to send but a write
handler is yet not installed. */
#define CLIENT_REPLY_OFF (1<<22) /* Don't send replies to client. */
#define CLIENT_REPLY_SKIP_NEXT (1<<23) /* Set CLIENT_REPLY_SKIP for next cmd */
#define CLIENT_REPLY_SKIP (1<<24) /* Don't send just this reply. */
#define CLIENT_LUA_DEBUG (1<<25) /* Run EVAL in debug mode. */
#define CLIENT_LUA_DEBUG_SYNC (1<<26) /* EVAL debugging without fork() */
#define CLIENT_MODULE (1<<27) /* Non connected client used by some module. */
#define CLIENT_PROTECTED (1<<28) /* Client should not be freed for now. */
/* #define CLIENT_... (1<<29) currently unused, feel free to use in the future */
#define CLIENT_PENDING_COMMAND (1<<30) /* Indicates the client has a fully
* parsed command ready for execution. */
#define CLIENT_TRACKING (1ULL<<31) /* Client enabled keys tracking in order to
perform client side caching. */
#define CLIENT_TRACKING_BROKEN_REDIR (1ULL<<32) /* Target client is invalid. */
#define CLIENT_TRACKING_BCAST (1ULL<<33) /* Tracking in BCAST mode. */
#define CLIENT_TRACKING_OPTIN (1ULL<<34) /* Tracking in opt-in mode. */
#define CLIENT_TRACKING_OPTOUT (1ULL<<35) /* Tracking in opt-out mode. */
#define CLIENT_TRACKING_CACHING (1ULL<<36) /* CACHING yes/no was given,
depending on optin/optout mode. */
#define CLIENT_TRACKING_NOLOOP (1ULL<<37) /* Don't send invalidation messages
about writes performed by myself.*/
#define CLIENT_IN_TO_TABLE (1ULL<<38) /* This client is in the timeout table. */
#define CLIENT_PROTOCOL_ERROR (1ULL<<39) /* Protocol error chatting with it. */
#define CLIENT_CLOSE_AFTER_COMMAND (1ULL<<40) /* Close after executing commands
* and writing entire reply. */
#define CLIENT_DENY_BLOCKING (1ULL<<41) /* Indicate that the client should not be blocked.
currently, turned on inside MULTI, Lua, RM_Call,
and AOF client */
#define CLIENT_REPL_RDBONLY (1ULL<<42) /* This client is a replica that only wants
RDB without replication buffer. */
#define CLIENT_NO_EVICT (1ULL<<43) /* This client is protected against client
memory eviction. */
/* Client block type (btype field in client structure)
* if CLIENT_BLOCKED flag is set. */
#define BLOCKED_NONE 0 /* Not blocked, no CLIENT_BLOCKED flag set. */
#define BLOCKED_LIST 1 /* BLPOP & co. */
#define BLOCKED_WAIT 2 /* WAIT for synchronous replication. */
#define BLOCKED_MODULE 3 /* Blocked by a loadable module. */
#define BLOCKED_STREAM 4 /* XREAD. */
#define BLOCKED_ZSET 5 /* BZPOP et al. */
#define BLOCKED_POSTPONE 6 /* Blocked by processCommand, re-try processing later. */
#define BLOCKED_SHUTDOWN 7 /* SHUTDOWN. */
#define BLOCKED_NUM 8 /* Number of blocked states. */
/* Client request types */
#define PROTO_REQ_INLINE 1
#define PROTO_REQ_MULTIBULK 2
/* Client classes for client limits, currently used only for
* the max-client-output-buffer limit implementation. */
#define CLIENT_TYPE_NORMAL 0 /* Normal req-reply clients + MONITORs */
#define CLIENT_TYPE_SLAVE 1 /* Slaves. */
#define CLIENT_TYPE_PUBSUB 2 /* Clients subscribed to PubSub channels. */
#define CLIENT_TYPE_MASTER 3 /* Master. */
#define CLIENT_TYPE_COUNT 4 /* Total number of client types. */
#define CLIENT_TYPE_OBUF_COUNT 3 /* Number of clients to expose to output
buffer configuration. Just the first
three: normal, slave, pubsub. */
/* Slave replication state. Used in server.repl_state for slaves to remember
* what to do next. */
typedef enum {
REPL_STATE_NONE = 0, /* No active replication */
REPL_STATE_CONNECT, /* Must connect to master */
REPL_STATE_CONNECTING, /* Connecting to master */
/* --- Handshake states, must be ordered --- */
REPL_STATE_RECEIVE_PING_REPLY, /* Wait for PING reply */
REPL_STATE_SEND_HANDSHAKE, /* Send handshake sequence to master */
REPL_STATE_RECEIVE_AUTH_REPLY, /* Wait for AUTH reply */
REPL_STATE_RECEIVE_PORT_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_RECEIVE_IP_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_RECEIVE_CAPA_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_SEND_PSYNC, /* Send PSYNC */
REPL_STATE_RECEIVE_PSYNC_REPLY, /* Wait for PSYNC reply */
/* --- End of handshake states --- */
REPL_STATE_TRANSFER, /* Receiving .rdb from master */
REPL_STATE_CONNECTED, /* Connected to master */
} repl_state;
/* The state of an in progress coordinated failover */
typedef enum {
NO_FAILOVER = 0, /* No failover in progress */
FAILOVER_WAIT_FOR_SYNC, /* Waiting for target replica to catch up */
FAILOVER_IN_PROGRESS /* Waiting for target replica to accept
* PSYNC FAILOVER request. */
} failover_state;
/* State of slaves from the POV of the master. Used in client->replstate.
* In SEND_BULK and ONLINE state the slave receives new updates
* in its output queue. In the WAIT_BGSAVE states instead the server is waiting
* to start the next background saving in order to send updates to it. */
#define SLAVE_STATE_WAIT_BGSAVE_START 6 /* We need to produce a new RDB file. */
#define SLAVE_STATE_WAIT_BGSAVE_END 7 /* Waiting RDB file creation to finish. */
#define SLAVE_STATE_SEND_BULK 8 /* Sending RDB file to slave. */
#define SLAVE_STATE_ONLINE 9 /* RDB file transmitted, sending just updates. */
/* Slave capabilities. */
#define SLAVE_CAPA_NONE 0
#define SLAVE_CAPA_EOF (1<<0) /* Can parse the RDB EOF streaming format. */
#define SLAVE_CAPA_PSYNC2 (1<<1) /* Supports PSYNC2 protocol. */
/* Slave requirements */
#define SLAVE_REQ_NONE 0
#define SLAVE_REQ_RDB_EXCLUDE_DATA (1 << 0) /* Exclude data from RDB */
#define SLAVE_REQ_RDB_EXCLUDE_FUNCTIONS (1 << 1) /* Exclude functions from RDB */
/* Mask of all bits in the slave requirements bitfield that represent non-standard (filtered) RDB requirements */
#define SLAVE_REQ_RDB_MASK (SLAVE_REQ_RDB_EXCLUDE_DATA | SLAVE_REQ_RDB_EXCLUDE_FUNCTIONS)
/* Synchronous read timeout - slave side */
#define CONFIG_REPL_SYNCIO_TIMEOUT 5
/* The default number of replication backlog blocks to trim per call. */
#define REPL_BACKLOG_TRIM_BLOCKS_PER_CALL 64
/* In order to quickly find the requested offset for PSYNC requests,
* we index some nodes in the replication buffer linked list into a rax. */
#define REPL_BACKLOG_INDEX_PER_BLOCKS 64
/* List related stuff */
#define LIST_HEAD 0
#define LIST_TAIL 1
#define ZSET_MIN 0
#define ZSET_MAX 1
/* Sort operations */
#define SORT_OP_GET 0
/* Log levels */
#define LL_DEBUG 0
#define LL_VERBOSE 1
#define LL_NOTICE 2
#define LL_WARNING 3
#define LL_RAW (1<<10) /* Modifier to log without timestamp */
/* Supervision options */
#define SUPERVISED_NONE 0
#define SUPERVISED_AUTODETECT 1
#define SUPERVISED_SYSTEMD 2
#define SUPERVISED_UPSTART 3
/* Anti-warning macro... */
#define UNUSED(V) ((void) V)
#define ZSKIPLIST_MAXLEVEL 32 /* Should be enough for 2^64 elements */
#define ZSKIPLIST_P 0.25 /* Skiplist P = 1/4 */
/* Append only defines */
#define AOF_FSYNC_NO 0
#define AOF_FSYNC_ALWAYS 1
#define AOF_FSYNC_EVERYSEC 2
/* Replication diskless load defines */
#define REPL_DISKLESS_LOAD_DISABLED 0
#define REPL_DISKLESS_LOAD_WHEN_DB_EMPTY 1
#define REPL_DISKLESS_LOAD_SWAPDB 2
/* TLS Client Authentication */
#define TLS_CLIENT_AUTH_NO 0
#define TLS_CLIENT_AUTH_YES 1
#define TLS_CLIENT_AUTH_OPTIONAL 2
/* Sanitize dump payload */
#define SANITIZE_DUMP_NO 0
#define SANITIZE_DUMP_YES 1
#define SANITIZE_DUMP_CLIENTS 2
/* Enable protected config/command */
#define PROTECTED_ACTION_ALLOWED_NO 0
#define PROTECTED_ACTION_ALLOWED_YES 1
#define PROTECTED_ACTION_ALLOWED_LOCAL 2
/* Sets operations codes */
#define SET_OP_UNION 0
#define SET_OP_DIFF 1
#define SET_OP_INTER 2
/* oom-score-adj defines */
#define OOM_SCORE_ADJ_NO 0
#define OOM_SCORE_RELATIVE 1
#define OOM_SCORE_ADJ_ABSOLUTE 2
/* Redis maxmemory strategies. Instead of using just incremental number
* for this defines, we use a set of flags so that testing for certain
* properties common to multiple policies is faster. */
#define MAXMEMORY_FLAG_LRU (1<<0)
#define MAXMEMORY_FLAG_LFU (1<<1)
#define MAXMEMORY_FLAG_ALLKEYS (1<<2)
#define MAXMEMORY_FLAG_NO_SHARED_INTEGERS \
(MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_LFU)
#define MAXMEMORY_VOLATILE_LRU ((0<<8)|MAXMEMORY_FLAG_LRU)
#define MAXMEMORY_VOLATILE_LFU ((1<<8)|MAXMEMORY_FLAG_LFU)
#define MAXMEMORY_VOLATILE_TTL (2<<8)
#define MAXMEMORY_VOLATILE_RANDOM (3<<8)
#define MAXMEMORY_ALLKEYS_LRU ((4<<8)|MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_ALLKEYS_LFU ((5<<8)|MAXMEMORY_FLAG_LFU|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_ALLKEYS_RANDOM ((6<<8)|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_NO_EVICTION (7<<8)
/* Units */
#define UNIT_SECONDS 0
#define UNIT_MILLISECONDS 1
/* SHUTDOWN flags */
#define SHUTDOWN_NOFLAGS 0 /* No flags. */
#define SHUTDOWN_SAVE 1 /* Force SAVE on SHUTDOWN even if no save
points are configured. */
#define SHUTDOWN_NOSAVE 2 /* Don't SAVE on SHUTDOWN. */
#define SHUTDOWN_NOW 4 /* Don't wait for replicas to catch up. */
#define SHUTDOWN_FORCE 8 /* Don't let errors prevent shutdown. */
/* Command call flags, see call() function */
#define CMD_CALL_NONE 0
#define CMD_CALL_SLOWLOG (1<<0)
#define CMD_CALL_STATS (1<<1)
#define CMD_CALL_PROPAGATE_AOF (1<<2)
#define CMD_CALL_PROPAGATE_REPL (1<<3)
#define CMD_CALL_PROPAGATE (CMD_CALL_PROPAGATE_AOF|CMD_CALL_PROPAGATE_REPL)
#define CMD_CALL_FULL (CMD_CALL_SLOWLOG | CMD_CALL_STATS | CMD_CALL_PROPAGATE)
#define CMD_CALL_FROM_MODULE (1<<4) /* From RM_Call */
/* Command propagation flags, see propagateNow() function */
#define PROPAGATE_NONE 0
#define PROPAGATE_AOF 1
#define PROPAGATE_REPL 2
/* Client pause types, larger types are more restrictive
* pause types than smaller pause types. */
typedef enum {
CLIENT_PAUSE_OFF = 0, /* Pause no commands */
CLIENT_PAUSE_WRITE, /* Pause write commands */
CLIENT_PAUSE_ALL /* Pause all commands */
} pause_type;
/* Client pause purposes. Each purpose has its own end time and pause type. */
typedef enum {
PAUSE_BY_CLIENT_COMMAND = 0,
PAUSE_DURING_SHUTDOWN,
PAUSE_DURING_FAILOVER,
NUM_PAUSE_PURPOSES /* This value is the number of purposes above. */
} pause_purpose;
typedef struct {
pause_type type;
mstime_t end;
} pause_event;
/* Ways that a clusters endpoint can be described */
typedef enum {
CLUSTER_ENDPOINT_TYPE_IP = 0, /* Show IP address */
CLUSTER_ENDPOINT_TYPE_HOSTNAME, /* Show hostname */
CLUSTER_ENDPOINT_TYPE_UNKNOWN_ENDPOINT /* Show NULL or empty */
} cluster_endpoint_type;
/* RDB active child save type. */
#define RDB_CHILD_TYPE_NONE 0
#define RDB_CHILD_TYPE_DISK 1 /* RDB is written to disk. */
#define RDB_CHILD_TYPE_SOCKET 2 /* RDB is written to slave socket. */
/* Keyspace changes notification classes. Every class is associated with a
* character for configuration purposes. */
#define NOTIFY_KEYSPACE (1<<0) /* K */
#define NOTIFY_KEYEVENT (1<<1) /* E */
#define NOTIFY_GENERIC (1<<2) /* g */
#define NOTIFY_STRING (1<<3) /* $ */
#define NOTIFY_LIST (1<<4) /* l */
#define NOTIFY_SET (1<<5) /* s */
#define NOTIFY_HASH (1<<6) /* h */
#define NOTIFY_ZSET (1<<7) /* z */
#define NOTIFY_EXPIRED (1<<8) /* x */
#define NOTIFY_EVICTED (1<<9) /* e */
#define NOTIFY_STREAM (1<<10) /* t */
#define NOTIFY_KEY_MISS (1<<11) /* m (Note: This one is excluded from NOTIFY_ALL on purpose) */
#define NOTIFY_LOADED (1<<12) /* module only key space notification, indicate a key loaded from rdb */
#define NOTIFY_MODULE (1<<13) /* d, module key space notification */
#define NOTIFY_NEW (1<<14) /* n, new key notification */
#define NOTIFY_ALL (NOTIFY_GENERIC | NOTIFY_STRING | NOTIFY_LIST | NOTIFY_SET | NOTIFY_HASH | NOTIFY_ZSET | NOTIFY_EXPIRED | NOTIFY_EVICTED | NOTIFY_STREAM | NOTIFY_MODULE) /* A flag */
/* Using the following macro you can run code inside serverCron() with the
* specified period, specified in milliseconds.
* The actual resolution depends on server.hz. */
#define run_with_period(_ms_) if ((_ms_ <= 1000/server.hz) || !(server.cronloops%((_ms_)/(1000/server.hz))))
/* We can print the stacktrace, so our assert is defined this way: */
#define serverAssertWithInfo(_c,_o,_e) ((_e)?(void)0 : (_serverAssertWithInfo(_c,_o,#_e,__FILE__,__LINE__),redis_unreachable()))
#define serverAssert(_e) ((_e)?(void)0 : (_serverAssert(#_e,__FILE__,__LINE__),redis_unreachable()))
#define serverPanic(...) _serverPanic(__FILE__,__LINE__,__VA_ARGS__),redis_unreachable()
/* latency histogram per command init settings */
#define LATENCY_HISTOGRAM_MIN_VALUE 1L /* >= 1 nanosec */
#define LATENCY_HISTOGRAM_MAX_VALUE 1000000000L /* <= 1 secs */
#define LATENCY_HISTOGRAM_PRECISION 2 /* Maintain a value precision of 2 significant digits across LATENCY_HISTOGRAM_MIN_VALUE and LATENCY_HISTOGRAM_MAX_VALUE range.
* Value quantization within the range will thus be no larger than 1/100th (or 1%) of any value.
* The total size per histogram should sit around 40 KiB Bytes. */
/* Busy module flags, see busy_module_yield_flags */
#define BUSY_MODULE_YIELD_NONE (0)
#define BUSY_MODULE_YIELD_EVENTS (1<<0)
#define BUSY_MODULE_YIELD_CLIENTS (1<<1)
/*-----------------------------------------------------------------------------
* Data types
*----------------------------------------------------------------------------*/
/* A redis object, that is a type able to hold a string / list / set */
/* The actual Redis Object */
#define OBJ_STRING 0 /* String object. */
#define OBJ_LIST 1 /* List object. */
#define OBJ_SET 2 /* Set object. */
#define OBJ_ZSET 3 /* Sorted set object. */
#define OBJ_HASH 4 /* Hash object. */
/* The "module" object type is a special one that signals that the object
* is one directly managed by a Redis module. In this case the value points
* to a moduleValue struct, which contains the object value (which is only
* handled by the module itself) and the RedisModuleType struct which lists
* function pointers in order to serialize, deserialize, AOF-rewrite and
* free the object.
*
* Inside the RDB file, module types are encoded as OBJ_MODULE followed
* by a 64 bit module type ID, which has a 54 bits module-specific signature
* in order to dispatch the loading to the right module, plus a 10 bits
* encoding version. */
#define OBJ_MODULE 5 /* Module object. */
#define OBJ_STREAM 6 /* Stream object. */
/* Extract encver / signature from a module type ID. */
#define REDISMODULE_TYPE_ENCVER_BITS 10
#define REDISMODULE_TYPE_ENCVER_MASK ((1<<REDISMODULE_TYPE_ENCVER_BITS)-1)
#define REDISMODULE_TYPE_ENCVER(id) (id & REDISMODULE_TYPE_ENCVER_MASK)
#define REDISMODULE_TYPE_SIGN(id) ((id & ~((uint64_t)REDISMODULE_TYPE_ENCVER_MASK)) >>REDISMODULE_TYPE_ENCVER_BITS)
/* Bit flags for moduleTypeAuxSaveFunc */
#define REDISMODULE_AUX_BEFORE_RDB (1<<0)
#define REDISMODULE_AUX_AFTER_RDB (1<<1)
struct RedisModule;
struct RedisModuleIO;
struct RedisModuleDigest;
struct RedisModuleCtx;
struct moduleLoadQueueEntry;
struct redisObject;
struct RedisModuleDefragCtx;
struct RedisModuleInfoCtx;
struct RedisModuleKeyOptCtx;
/* Each module type implementation should export a set of methods in order
* to serialize and deserialize the value in the RDB file, rewrite the AOF
* log, create the digest for "DEBUG DIGEST", and free the value when a key
* is deleted. */
typedef void *(*moduleTypeLoadFunc)(struct RedisModuleIO *io, int encver);
typedef void (*moduleTypeSaveFunc)(struct RedisModuleIO *io, void *value);
typedef int (*moduleTypeAuxLoadFunc)(struct RedisModuleIO *rdb, int encver, int when);
typedef void (*moduleTypeAuxSaveFunc)(struct RedisModuleIO *rdb, int when);
typedef void (*moduleTypeRewriteFunc)(struct RedisModuleIO *io, struct redisObject *key, void *value);
typedef void (*moduleTypeDigestFunc)(struct RedisModuleDigest *digest, void *value);
typedef size_t (*moduleTypeMemUsageFunc)(const void *value);
typedef void (*moduleTypeFreeFunc)(void *value);
typedef size_t (*moduleTypeFreeEffortFunc)(struct redisObject *key, const void *value);
typedef void (*moduleTypeUnlinkFunc)(struct redisObject *key, void *value);
typedef void *(*moduleTypeCopyFunc)(struct redisObject *fromkey, struct redisObject *tokey, const void *value);
typedef int (*moduleTypeDefragFunc)(struct RedisModuleDefragCtx *ctx, struct redisObject *key, void **value);
typedef void (*RedisModuleInfoFunc)(struct RedisModuleInfoCtx *ctx, int for_crash_report);
typedef void (*RedisModuleDefragFunc)(struct RedisModuleDefragCtx *ctx);
typedef size_t (*moduleTypeMemUsageFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value, size_t sample_size);
typedef void (*moduleTypeFreeFunc2)(struct RedisModuleKeyOptCtx *ctx, void *value);
typedef size_t (*moduleTypeFreeEffortFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value);
typedef void (*moduleTypeUnlinkFunc2)(struct RedisModuleKeyOptCtx *ctx, void *value);
typedef void *(*moduleTypeCopyFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value);
/* This callback type is called by moduleNotifyUserChanged() every time
* a user authenticated via the module API is associated with a different
* user or gets disconnected. This needs to be exposed since you can't cast
* a function pointer to (void *). */
typedef void (*RedisModuleUserChangedFunc) (uint64_t client_id, void *privdata);
/* The module type, which is referenced in each value of a given type, defines
* the methods and links to the module exporting the type. */
typedef struct RedisModuleType {
uint64_t id; /* Higher 54 bits of type ID + 10 lower bits of encoding ver. */
struct RedisModule *module;
moduleTypeLoadFunc rdb_load;
moduleTypeSaveFunc rdb_save;
moduleTypeRewriteFunc aof_rewrite;
moduleTypeMemUsageFunc mem_usage;
moduleTypeDigestFunc digest;
moduleTypeFreeFunc free;
moduleTypeFreeEffortFunc free_effort;
moduleTypeUnlinkFunc unlink;
moduleTypeCopyFunc copy;
moduleTypeDefragFunc defrag;
moduleTypeAuxLoadFunc aux_load;
moduleTypeAuxSaveFunc aux_save;
moduleTypeMemUsageFunc2 mem_usage2;
moduleTypeFreeEffortFunc2 free_effort2;
moduleTypeUnlinkFunc2 unlink2;
moduleTypeCopyFunc2 copy2;
int aux_save_triggers;
char name[10]; /* 9 bytes name + null term. Charset: A-Z a-z 0-9 _- */
} moduleType;
/* In Redis objects 'robj' structures of type OBJ_MODULE, the value pointer
* is set to the following structure, referencing the moduleType structure
* in order to work with the value, and at the same time providing a raw
* pointer to the value, as created by the module commands operating with
* the module type.
*
* So for example in order to free such a value, it is possible to use
* the following code:
*
* if (robj->type == OBJ_MODULE) {
* moduleValue *mt = robj->ptr;
* mt->type->free(mt->value);
* zfree(mt); // We need to release this in-the-middle struct as well.
* }
*/
typedef struct moduleValue {
moduleType *type;
void *value;
} moduleValue;
/* This structure represents a module inside the system. */
struct RedisModule {
void *handle; /* Module dlopen() handle. */
char *name; /* Module name. */
int ver; /* Module version. We use just progressive integers. */
int apiver; /* Module API version as requested during initialization.*/
list *types; /* Module data types. */
list *usedby; /* List of modules using APIs from this one. */
list *using; /* List of modules we use some APIs of. */
list *filters; /* List of filters the module has registered. */
list *module_configs; /* List of configurations the module has registered */
int configs_initialized; /* Have the module configurations been initialized? */
int in_call; /* RM_Call() nesting level */
int in_hook; /* Hooks callback nesting level for this module (0 or 1). */
int options; /* Module options and capabilities. */
int blocked_clients; /* Count of RedisModuleBlockedClient in this module. */
RedisModuleInfoFunc info_cb; /* Callback for module to add INFO fields. */
RedisModuleDefragFunc defrag_cb; /* Callback for global data defrag. */
struct moduleLoadQueueEntry *loadmod; /* Module load arguments for config rewrite. */
};
typedef struct RedisModule RedisModule;
/* This is a wrapper for the 'rio' streams used inside rdb.c in Redis, so that
* the user does not have to take the total count of the written bytes nor
* to care about error conditions. */
typedef struct RedisModuleIO {
size_t bytes; /* Bytes read / written so far. */
rio *rio; /* Rio stream. */
moduleType *type; /* Module type doing the operation. */
int error; /* True if error condition happened. */
int ver; /* Module serialization version: 1 (old),
* 2 (current version with opcodes annotation). */
struct RedisModuleCtx *ctx; /* Optional context, see RM_GetContextFromIO()*/
struct redisObject *key; /* Optional name of key processed */
int dbid; /* The dbid of the key being processed, -1 when unknown. */
} RedisModuleIO;
/* Macro to initialize an IO context. Note that the 'ver' field is populated
* inside rdb.c according to the version of the value to load. */
#define moduleInitIOContext(iovar,mtype,rioptr,keyptr,db) do { \
iovar.rio = rioptr; \
iovar.type = mtype; \
iovar.bytes = 0; \
iovar.error = 0; \
iovar.ver = 0; \
iovar.key = keyptr; \
iovar.dbid = db; \
iovar.ctx = NULL; \
} while(0)
/* This is a structure used to export DEBUG DIGEST capabilities to Redis
* modules. We want to capture both the ordered and unordered elements of
* a data structure, so that a digest can be created in a way that correctly
* reflects the values. See the DEBUG DIGEST command implementation for more
* background. */
typedef struct RedisModuleDigest {
unsigned char o[20]; /* Ordered elements. */
unsigned char x[20]; /* Xored elements. */
struct redisObject *key; /* Optional name of key processed */
int dbid; /* The dbid of the key being processed */
} RedisModuleDigest;
/* Just start with a digest composed of all zero bytes. */
#define moduleInitDigestContext(mdvar) do { \
memset(mdvar.o,0,sizeof(mdvar.o)); \
memset(mdvar.x,0,sizeof(mdvar.x)); \
} while(0)
/* Objects encoding. Some kind of objects like Strings and Hashes can be
* internally represented in multiple ways. The 'encoding' field of the object
* is set to one of this fields for this object. */
#define OBJ_ENCODING_RAW 0 /* Raw representation */
#define OBJ_ENCODING_INT 1 /* Encoded as integer */
#define OBJ_ENCODING_HT 2 /* Encoded as hash table */
#define OBJ_ENCODING_ZIPMAP 3 /* Encoded as zipmap */
#define OBJ_ENCODING_LINKEDLIST 4 /* No longer used: old list encoding. */
#define OBJ_ENCODING_ZIPLIST 5 /* Encoded as ziplist */
#define OBJ_ENCODING_INTSET 6 /* Encoded as intset */
#define OBJ_ENCODING_SKIPLIST 7 /* Encoded as skiplist */
#define OBJ_ENCODING_EMBSTR 8 /* Embedded sds string encoding */
#define OBJ_ENCODING_QUICKLIST 9 /* Encoded as linked list of listpacks */
#define OBJ_ENCODING_STREAM 10 /* Encoded as a radix tree of listpacks */
#define OBJ_ENCODING_LISTPACK 11 /* Encoded as a listpack */
#define LRU_BITS 24
#define LRU_CLOCK_MAX ((1<<LRU_BITS)-1) /* Max value of obj->lru */
#define LRU_CLOCK_RESOLUTION 1000 /* LRU clock resolution in ms */
#define OBJ_SHARED_REFCOUNT INT_MAX /* Global object never destroyed. */
#define OBJ_STATIC_REFCOUNT (INT_MAX-1) /* Object allocated in the stack. */
#define OBJ_FIRST_SPECIAL_REFCOUNT OBJ_STATIC_REFCOUNT
typedef struct redisObject {
unsigned type:4;
unsigned encoding:4;
unsigned lru:LRU_BITS; /* LRU time (relative to global lru_clock) or
* LFU data (least significant 8 bits frequency
* and most significant 16 bits access time). */
int refcount;
void *ptr;
} robj;
/* The a string name for an object's type as listed above
* Native types are checked against the OBJ_STRING, OBJ_LIST, OBJ_* defines,
* and Module types have their registered name returned. */
char *getObjectTypeName(robj*);
/* Macro used to initialize a Redis object allocated on the stack.
* Note that this macro is taken near the structure definition to make sure
* we'll update it when the structure is changed, to avoid bugs like
* bug #85 introduced exactly in this way. */
#define initStaticStringObject(_var,_ptr) do { \
_var.refcount = OBJ_STATIC_REFCOUNT; \
_var.type = OBJ_STRING; \
_var.encoding = OBJ_ENCODING_RAW; \
_var.ptr = _ptr; \
} while(0)
struct evictionPoolEntry; /* Defined in evict.c */
/* This structure is used in order to represent the output buffer of a client,
* which is actually a linked list of blocks like that, that is: client->reply. */
typedef struct clientReplyBlock {
size_t size, used;
char buf[];
} clientReplyBlock;
/* Replication buffer blocks is the list of replBufBlock.
*
* +--------------+ +--------------+ +--------------+
* | refcount = 1 | ... | refcount = 0 | ... | refcount = 2 |
* +--------------+ +--------------+ +--------------+
* | / \
* | / \
* | / \
* Repl Backlog Replia_A Replia_B
*
* Each replica or replication backlog increments only the refcount of the
* 'ref_repl_buf_node' which it points to. So when replica walks to the next
* node, it should first increase the next node's refcount, and when we trim
* the replication buffer nodes, we remove node always from the head node which
* refcount is 0. If the refcount of the head node is not 0, we must stop
* trimming and never iterate the next node. */
/* Similar with 'clientReplyBlock', it is used for shared buffers between
* all replica clients and replication backlog. */
typedef struct replBufBlock {
int refcount; /* Number of replicas or repl backlog using. */
long long id; /* The unique incremental number. */
long long repl_offset; /* Start replication offset of the block. */
size_t size, used;
char buf[];
} replBufBlock;
/* Opaque type for the Slot to Key API. */
typedef struct clusterSlotToKeyMapping clusterSlotToKeyMapping;
/* Redis database representation. There are multiple databases identified
* by integers from 0 (the default database) up to the max configured
* database. The database number is the 'id' field in the structure. */
typedef struct redisDb {
dict *dict; /* The keyspace for this DB */
dict *expires; /* Timeout of keys with a timeout set */
dict *blocking_keys; /* Keys with clients waiting for data (BLPOP)*/
dict *ready_keys; /* Blocked keys that received a PUSH */
dict *watched_keys; /* WATCHED keys for MULTI/EXEC CAS */
int id; /* Database ID */
long long avg_ttl; /* Average TTL, just for stats */
unsigned long expires_cursor; /* Cursor of the active expire cycle. */
list *defrag_later; /* List of key names to attempt to defrag one by one, gradually. */
clusterSlotToKeyMapping *slots_to_keys; /* Array of slots to keys. Only used in cluster mode (db 0). */
} redisDb;
/* forward declaration for functions ctx */
typedef struct functionsLibCtx functionsLibCtx;
/* Holding object that need to be populated during
* rdb loading. On loading end it is possible to decide
* whether not to set those objects on their rightful place.
* For example: dbarray need to be set as main database on
* successful loading and dropped on failure. */
typedef struct rdbLoadingCtx {
redisDb* dbarray;
functionsLibCtx* functions_lib_ctx;
}rdbLoadingCtx;
/* Client MULTI/EXEC state */
typedef struct multiCmd {
robj **argv;
int argv_len;
int argc;
struct redisCommand *cmd;
} multiCmd;
typedef struct multiState {
multiCmd *commands; /* Array of MULTI commands */
int count; /* Total number of MULTI commands */
int cmd_flags; /* The accumulated command flags OR-ed together.
So if at least a command has a given flag, it
will be set in this field. */
int cmd_inv_flags; /* Same as cmd_flags, OR-ing the ~flags. so that it
is possible to know if all the commands have a
certain flag. */
size_t argv_len_sums; /* mem used by all commands arguments */
} multiState;
/* This structure holds the blocking operation state for a client.
* The fields used depend on client->btype. */
typedef struct blockingState {
/* Generic fields. */
long count; /* Elements to pop if count was specified (BLMPOP/BZMPOP), -1 otherwise. */
mstime_t timeout; /* Blocking operation timeout. If UNIX current time
* is > timeout then the operation timed out. */
/* BLOCKED_LIST, BLOCKED_ZSET and BLOCKED_STREAM */
dict *keys; /* The keys we are waiting to terminate a blocking
* operation such as BLPOP or XREAD. Or NULL. */
robj *target; /* The key that should receive the element,
* for BLMOVE. */
struct blockPos {
int wherefrom; /* Where to pop from */
int whereto; /* Where to push to */
} blockpos; /* The positions in the src/dst lists/zsets
* where we want to pop/push an element
* for BLPOP, BRPOP, BLMOVE and BZMPOP. */
/* BLOCK_STREAM */
size_t xread_count; /* XREAD COUNT option. */
robj *xread_group; /* XREADGROUP group name. */
robj *xread_consumer; /* XREADGROUP consumer name. */
int xread_group_noack;
/* BLOCKED_WAIT */
int numreplicas; /* Number of replicas we are waiting for ACK. */
long long reploffset; /* Replication offset to reach. */
/* BLOCKED_MODULE */
void *module_blocked_handle; /* RedisModuleBlockedClient structure.
which is opaque for the Redis core, only
handled in module.c. */
} blockingState;
/* The following structure represents a node in the server.ready_keys list,
* where we accumulate all the keys that had clients blocked with a blocking
* operation such as B[LR]POP, but received new data in the context of the
* last executed command.
*
* After the execution of every command or script, we run this list to check
* if as a result we should serve data to clients blocked, unblocking them.
* Note that server.ready_keys will not have duplicates as there dictionary
* also called ready_keys in every structure representing a Redis database,
* where we make sure to remember if a given key was already added in the
* server.ready_keys list. */
typedef struct readyList {
redisDb *db;
robj *key;
} readyList;
/* This structure represents a Redis user. This is useful for ACLs, the
* user is associated to the connection after the connection is authenticated.
* If there is no associated user, the connection uses the default user. */
#define USER_COMMAND_BITS_COUNT 1024 /* The total number of command bits
in the user structure. The last valid
command ID we can set in the user
is USER_COMMAND_BITS_COUNT-1. */
#define USER_FLAG_ENABLED (1<<0) /* The user is active. */
#define USER_FLAG_DISABLED (1<<1) /* The user is disabled. */
#define USER_FLAG_NOPASS (1<<2) /* The user requires no password, any
provided password will work. For the
default user, this also means that
no AUTH is needed, and every
connection is immediately
authenticated. */
#define USER_FLAG_SANITIZE_PAYLOAD (1<<3) /* The user require a deep RESTORE
* payload sanitization. */
#define USER_FLAG_SANITIZE_PAYLOAD_SKIP (1<<4) /* The user should skip the
* deep sanitization of RESTORE
* payload. */
#define SELECTOR_FLAG_ROOT (1<<0) /* This is the root user permission
* selector. */
#define SELECTOR_FLAG_ALLKEYS (1<<1) /* The user can mention any key. */
#define SELECTOR_FLAG_ALLCOMMANDS (1<<2) /* The user can run all commands. */
#define SELECTOR_FLAG_ALLCHANNELS (1<<3) /* The user can mention any Pub/Sub
channel. */
typedef struct {
sds name; /* The username as an SDS string. */
uint32_t flags; /* See USER_FLAG_* */
list *passwords; /* A list of SDS valid passwords for this user. */
list *selectors; /* A list of selectors this user validates commands
against. This list will always contain at least
one selector for backwards compatibility. */
} user;
/* With multiplexing we need to take per-client state.
* Clients are taken in a linked list. */
#define CLIENT_ID_AOF (UINT64_MAX) /* Reserved ID for the AOF client. If you
need more reserved IDs use UINT64_MAX-1,
-2, ... and so forth. */
/* Replication backlog is not separate memory, it just is one consumer of
* the global replication buffer. This structure records the reference of
* replication buffers. Since the replication buffer block list may be very long,
* it would cost much time to search replication offset on partial resync, so
* we use one rax tree to index some blocks every REPL_BACKLOG_INDEX_PER_BLOCKS
* to make searching offset from replication buffer blocks list faster. */
typedef struct replBacklog {
listNode *ref_repl_buf_node; /* Referenced node of replication buffer blocks,
* see the definition of replBufBlock. */
size_t unindexed_count; /* The count from last creating index block. */
rax *blocks_index; /* The index of recorded blocks of replication
* buffer for quickly searching replication
* offset on partial resynchronization. */
long long histlen; /* Backlog actual data length */
long long offset; /* Replication "master offset" of first
* byte in the replication backlog buffer.*/
} replBacklog;
typedef struct {
list *clients;
size_t mem_usage_sum;
} clientMemUsageBucket;
typedef struct client {
uint64_t id; /* Client incremental unique ID. */
connection *conn;
int resp; /* RESP protocol version. Can be 2 or 3. */
redisDb *db; /* Pointer to currently SELECTed DB. */
robj *name; /* As set by CLIENT SETNAME. */
sds querybuf; /* Buffer we use to accumulate client queries. */
size_t qb_pos; /* The position we have read in querybuf. */
size_t querybuf_peak; /* Recent (100ms or more) peak of querybuf size. */
int argc; /* Num of arguments of current command. */
robj **argv; /* Arguments of current command. */
int argv_len; /* Size of argv array (may be more than argc) */
int original_argc; /* Num of arguments of original command if arguments were rewritten. */
robj **original_argv; /* Arguments of original command if arguments were rewritten. */
size_t argv_len_sum; /* Sum of lengths of objects in argv list. */
struct redisCommand *cmd, *lastcmd; /* Last command executed. */
struct redisCommand *realcmd; /* The original command that was executed by the client,
Used to update error stats in case the c->cmd was modified
during the command invocation (like on GEOADD for example). */
user *user; /* User associated with this connection. If the
user is set to NULL the connection can do
anything (admin). */
int reqtype; /* Request protocol type: PROTO_REQ_* */
int multibulklen; /* Number of multi bulk arguments left to read. */
long bulklen; /* Length of bulk argument in multi bulk request. */
list *reply; /* List of reply objects to send to the client. */
unsigned long long reply_bytes; /* Tot bytes of objects in reply list. */
list *deferred_reply_errors; /* Used for module thread safe contexts. */
size_t sentlen; /* Amount of bytes already sent in the current
buffer or object being sent. */
time_t ctime; /* Client creation time. */
long duration; /* Current command duration. Used for measuring latency of blocking/non-blocking cmds */
int slot; /* The slot the client is executing against. Set to -1 if no slot is being used */
time_t lastinteraction; /* Time of the last interaction, used for timeout */
time_t obuf_soft_limit_reached_time;
uint64_t flags; /* Client flags: CLIENT_* macros. */
int authenticated; /* Needed when the default user requires auth. */
int replstate; /* Replication state if this is a slave. */
int repl_start_cmd_stream_on_ack; /* Install slave write handler on first ACK. */
int repldbfd; /* Replication DB file descriptor. */
off_t repldboff; /* Replication DB file offset. */
off_t repldbsize; /* Replication DB file size. */
sds replpreamble; /* Replication DB preamble. */
long long read_reploff; /* Read replication offset if this is a master. */
long long reploff; /* Applied replication offset if this is a master. */
long long repl_applied; /* Applied replication data count in querybuf, if this is a replica. */
long long repl_ack_off; /* Replication ack offset, if this is a slave. */
long long repl_ack_time;/* Replication ack time, if this is a slave. */
long long repl_last_partial_write; /* The last time the server did a partial write from the RDB child pipe to this replica */
long long psync_initial_offset; /* FULLRESYNC reply offset other slaves
copying this slave output buffer
should use. */
char replid[CONFIG_RUN_ID_SIZE+1]; /* Master replication ID (if master). */
int slave_listening_port; /* As configured with: REPLCONF listening-port */
char *slave_addr; /* Optionally given by REPLCONF ip-address */
int slave_capa; /* Slave capabilities: SLAVE_CAPA_* bitwise OR. */
int slave_req; /* Slave requirements: SLAVE_REQ_* */
multiState mstate; /* MULTI/EXEC state */
int btype; /* Type of blocking op if CLIENT_BLOCKED. */
blockingState bpop; /* blocking state */
long long woff; /* Last write global replication offset. */
list *watched_keys; /* Keys WATCHED for MULTI/EXEC CAS */
dict *pubsub_channels; /* channels a client is interested in (SUBSCRIBE) */
list *pubsub_patterns; /* patterns a client is interested in (SUBSCRIBE) */
dict *pubsubshard_channels; /* shard level channels a client is interested in (SSUBSCRIBE) */
sds peerid; /* Cached peer ID. */
sds sockname; /* Cached connection target address. */
listNode *client_list_node; /* list node in client list */
listNode *postponed_list_node; /* list node within the postponed list */
listNode *pending_read_list_node; /* list node in clients pending read list */
RedisModuleUserChangedFunc auth_callback; /* Module callback to execute
* when the authenticated user
* changes. */
void *auth_callback_privdata; /* Private data that is passed when the auth
* changed callback is executed. Opaque for
* Redis Core. */
void *auth_module; /* The module that owns the callback, which is used
* to disconnect the client if the module is
* unloaded for cleanup. Opaque for Redis Core.*/
/* If this client is in tracking mode and this field is non zero,
* invalidation messages for keys fetched by this client will be send to
* the specified client ID. */
uint64_t client_tracking_redirection;
rax *client_tracking_prefixes; /* A dictionary of prefixes we are already
subscribed to in BCAST mode, in the
context of client side caching. */
/* In updateClientMemUsage() we track the memory usage of
* each client and add it to the sum of all the clients of a given type,
* however we need to remember what was the old contribution of each
* client, and in which category the client was, in order to remove it
* before adding it the new value. */
size_t last_memory_usage;
int last_memory_type;
listNode *mem_usage_bucket_node;
clientMemUsageBucket *mem_usage_bucket;
listNode *ref_repl_buf_node; /* Referenced node of replication buffer blocks,
* see the definition of replBufBlock. */
size_t ref_block_pos; /* Access position of referenced buffer block,
* i.e. the next offset to send. */
/* Response buffer */
size_t buf_peak; /* Peak used size of buffer in last 5 sec interval. */
mstime_t buf_peak_last_reset_time; /* keeps the last time the buffer peak value was reset */
int bufpos;
size_t buf_usable_size; /* Usable size of buffer. */
char *buf;
} client;
struct saveparam {
time_t seconds;
int changes;
};
struct moduleLoadQueueEntry {
sds path;
int argc;
robj **argv;
};
struct sentinelLoadQueueEntry {
int argc;
sds *argv;
int linenum;
sds line;
};
struct sentinelConfig {
list *pre_monitor_cfg;
list *monitor_cfg;
list *post_monitor_cfg;
};
struct sharedObjectsStruct {
robj *crlf, *ok, *err, *emptybulk, *czero, *cone, *pong, *space,
*queued, *null[4], *nullarray[4], *emptymap[4], *emptyset[4],
*emptyarray, *wrongtypeerr, *nokeyerr, *syntaxerr, *sameobjecterr,
*outofrangeerr, *noscripterr, *loadingerr,
*slowevalerr, *slowscripterr, *slowmoduleerr, *bgsaveerr,
*masterdownerr, *roslaveerr, *execaborterr, *noautherr, *noreplicaserr,
*busykeyerr, *oomerr, *plus, *messagebulk, *pmessagebulk, *subscribebulk,
*unsubscribebulk, *psubscribebulk, *punsubscribebulk, *del, *unlink,
*rpop, *lpop, *lpush, *rpoplpush, *lmove, *blmove, *zpopmin, *zpopmax,
*emptyscan, *multi, *exec, *left, *right, *hset, *srem, *xgroup, *xclaim,
*script, *replconf, *eval, *persist, *set, *pexpireat, *pexpire,
*time, *pxat, *absttl, *retrycount, *force, *justid, *entriesread,
*lastid, *ping, *setid, *keepttl, *load, *createconsumer,
*getack, *special_asterick, *special_equals, *default_username, *redacted,
*ssubscribebulk,*sunsubscribebulk,
*select[PROTO_SHARED_SELECT_CMDS],
*integers[OBJ_SHARED_INTEGERS],
*mbulkhdr[OBJ_SHARED_BULKHDR_LEN], /* "*<value>\r\n" */
*bulkhdr[OBJ_SHARED_BULKHDR_LEN], /* "$<value>\r\n" */
*maphdr[OBJ_SHARED_BULKHDR_LEN], /* "%<value>\r\n" */
*sethdr[OBJ_SHARED_BULKHDR_LEN]; /* "~<value>\r\n" */
sds minstring, maxstring;
};
/* ZSETs use a specialized version of Skiplists */
typedef struct zskiplistNode {
sds ele;
double score;
struct zskiplistNode *backward;
struct zskiplistLevel {
struct zskiplistNode *forward;
unsigned long span;
} level[];
} zskiplistNode;
typedef struct zskiplist {
struct zskiplistNode *header, *tail;
unsigned long length;
int level;
} zskiplist;
typedef struct zset {
dict *dict;
zskiplist *zsl;
} zset;
typedef struct clientBufferLimitsConfig {
unsigned long long hard_limit_bytes;
unsigned long long soft_limit_bytes;
time_t soft_limit_seconds;
} clientBufferLimitsConfig;
extern clientBufferLimitsConfig clientBufferLimitsDefaults[CLIENT_TYPE_OBUF_COUNT];
/* The redisOp structure defines a Redis Operation, that is an instance of
* a command with an argument vector, database ID, propagation target
* (PROPAGATE_*), and command pointer.
*
* Currently only used to additionally propagate more commands to AOF/Replication
* after the propagation of the executed command. */
typedef struct redisOp {
robj **argv;
int argc, dbid, target;
} redisOp;
/* Defines an array of Redis operations. There is an API to add to this
* structure in an easy way.
*
* redisOpArrayInit();
* redisOpArrayAppend();
* redisOpArrayFree();
*/
typedef struct redisOpArray {
redisOp *ops;
int numops;
int capacity;
} redisOpArray;
/* This structure is returned by the getMemoryOverheadData() function in
* order to return memory overhead information. */
struct redisMemOverhead {
size_t peak_allocated;
size_t total_allocated;
size_t startup_allocated;
size_t repl_backlog;
size_t clients_slaves;
size_t clients_normal;
size_t cluster_links;
size_t aof_buffer;
size_t lua_caches;
size_t functions_caches;
size_t overhead_total;
size_t dataset;
size_t total_keys;
size_t bytes_per_key;
float dataset_perc;
float peak_perc;
float total_frag;
ssize_t total_frag_bytes;
float allocator_frag;
ssize_t allocator_frag_bytes;
float allocator_rss;
ssize_t allocator_rss_bytes;
float rss_extra;
size_t rss_extra_bytes;
size_t num_dbs;
struct {
size_t dbid;
size_t overhead_ht_main;
size_t overhead_ht_expires;
size_t overhead_ht_slot_to_keys;
} *db;
};
/* Replication error behavior determines the replica behavior
* when it receives an error over the replication stream. In
* either case the error is logged. */
typedef enum {
PROPAGATION_ERR_BEHAVIOR_IGNORE = 0,
PROPAGATION_ERR_BEHAVIOR_PANIC,
PROPAGATION_ERR_BEHAVIOR_PANIC_ON_REPLICAS
} replicationErrorBehavior;
/* This structure can be optionally passed to RDB save/load functions in
* order to implement additional functionalities, by storing and loading
* metadata to the RDB file.
*
* For example, to use select a DB at load time, useful in
* replication in order to make sure that chained slaves (slaves of slaves)
* select the correct DB and are able to accept the stream coming from the
* top-level master. */
typedef struct rdbSaveInfo {
/* Used saving and loading. */
int repl_stream_db; /* DB to select in server.master client. */
/* Used only loading. */
int repl_id_is_set; /* True if repl_id field is set. */
char repl_id[CONFIG_RUN_ID_SIZE+1]; /* Replication ID. */
long long repl_offset; /* Replication offset. */
} rdbSaveInfo;
#define RDB_SAVE_INFO_INIT {-1,0,"0000000000000000000000000000000000000000",-1}
struct malloc_stats {
size_t zmalloc_used;
size_t process_rss;
size_t allocator_allocated;
size_t allocator_active;
size_t allocator_resident;
};
typedef struct socketFds {
int fd[CONFIG_BINDADDR_MAX];
int count;
} socketFds;
/*-----------------------------------------------------------------------------
* TLS Context Configuration
*----------------------------------------------------------------------------*/
typedef struct redisTLSContextConfig {
char *cert_file; /* Server side and optionally client side cert file name */
char *key_file; /* Private key filename for cert_file */
char *key_file_pass; /* Optional password for key_file */
char *client_cert_file; /* Certificate to use as a client; if none, use cert_file */
char *client_key_file; /* Private key filename for client_cert_file */
char *client_key_file_pass; /* Optional password for client_key_file */
char *dh_params_file;
char *ca_cert_file;
char *ca_cert_dir;
char *protocols;
char *ciphers;
char *ciphersuites;
int prefer_server_ciphers;
int session_caching;
int session_cache_size;
int session_cache_timeout;
} redisTLSContextConfig;
/*-----------------------------------------------------------------------------
* AOF manifest definition
*----------------------------------------------------------------------------*/
typedef enum {
AOF_FILE_TYPE_BASE = 'b', /* BASE file */
AOF_FILE_TYPE_HIST = 'h', /* HISTORY file */
AOF_FILE_TYPE_INCR = 'i', /* INCR file */
} aof_file_type;
typedef struct {
sds file_name; /* file name */
long long file_seq; /* file sequence */
aof_file_type file_type; /* file type */
} aofInfo;
typedef struct {
aofInfo *base_aof_info; /* BASE file information. NULL if there is no BASE file. */
list *incr_aof_list; /* INCR AOFs list. We may have multiple INCR AOF when rewrite fails. */
list *history_aof_list; /* HISTORY AOF list. When the AOFRW success, The aofInfo contained in
`base_aof_info` and `incr_aof_list` will be moved to this list. We
will delete these AOF files when AOFRW finish. */
long long curr_base_file_seq; /* The sequence number used by the current BASE file. */
long long curr_incr_file_seq; /* The sequence number used by the current INCR file. */
int dirty; /* 1 Indicates that the aofManifest in the memory is inconsistent with
disk, we need to persist it immediately. */
} aofManifest;
/*-----------------------------------------------------------------------------
* Global server state
*----------------------------------------------------------------------------*/
/* AIX defines hz to __hz, we don't use this define and in order to allow
* Redis build on AIX we need to undef it. */
#ifdef _AIX
#undef hz
#endif
#define CHILD_TYPE_NONE 0
#define CHILD_TYPE_RDB 1
#define CHILD_TYPE_AOF 2
#define CHILD_TYPE_LDB 3
#define CHILD_TYPE_MODULE 4
typedef enum childInfoType {
CHILD_INFO_TYPE_CURRENT_INFO,
CHILD_INFO_TYPE_AOF_COW_SIZE,
CHILD_INFO_TYPE_RDB_COW_SIZE,
CHILD_INFO_TYPE_MODULE_COW_SIZE
} childInfoType;
struct redisServer {
/* General */
pid_t pid; /* Main process pid. */
pthread_t main_thread_id; /* Main thread id */
char *configfile; /* Absolute config file path, or NULL */
char *executable; /* Absolute executable file path. */
char **exec_argv; /* Executable argv vector (copy). */
int dynamic_hz; /* Change hz value depending on # of clients. */
int config_hz; /* Configured HZ value. May be different than
the actual 'hz' field value if dynamic-hz
is enabled. */
mode_t umask; /* The umask value of the process on startup */
int hz; /* serverCron() calls frequency in hertz */
int in_fork_child; /* indication that this is a fork child */
redisDb *db;
dict *commands; /* Command table */
dict *orig_commands; /* Command table before command renaming. */
aeEventLoop *el;
rax *errors; /* Errors table */
redisAtomic unsigned int lruclock; /* Clock for LRU eviction */
volatile sig_atomic_t shutdown_asap; /* Shutdown ordered by signal handler. */
mstime_t shutdown_mstime; /* Timestamp to limit graceful shutdown. */
int last_sig_received; /* Indicates the last SIGNAL received, if any (e.g., SIGINT or SIGTERM). */
int shutdown_flags; /* Flags passed to prepareForShutdown(). */
int activerehashing; /* Incremental rehash in serverCron() */
int active_defrag_running; /* Active defragmentation running (holds current scan aggressiveness) */
char *pidfile; /* PID file path */
int arch_bits; /* 32 or 64 depending on sizeof(long) */
int cronloops; /* Number of times the cron function run */
char runid[CONFIG_RUN_ID_SIZE+1]; /* ID always different at every exec. */
int sentinel_mode; /* True if this instance is a Sentinel. */
size_t initial_memory_usage; /* Bytes used after initialization. */
int always_show_logo; /* Show logo even for non-stdout logging. */
int in_script; /* Are we inside EVAL? */
int in_exec; /* Are we inside EXEC? */
int busy_module_yield_flags; /* Are we inside a busy module? (triggered by RM_Yield). see BUSY_MODULE_YIELD_ flags. */
const char *busy_module_yield_reply; /* When non-null, we are inside RM_Yield. */
int core_propagates; /* Is the core (in oppose to the module subsystem) is in charge of calling propagatePendingCommands? */
int propagate_no_multi; /* True if propagatePendingCommands should avoid wrapping command in MULTI/EXEC */
int module_ctx_nesting; /* moduleCreateContext() nesting level */
char *ignore_warnings; /* Config: warnings that should be ignored. */
int client_pause_in_transaction; /* Was a client pause executed during this Exec? */
int thp_enabled; /* If true, THP is enabled. */
size_t page_size; /* The page size of OS. */
/* Modules */
dict *moduleapi; /* Exported core APIs dictionary for modules. */
dict *sharedapi; /* Like moduleapi but containing the APIs that
modules share with each other. */
dict *module_configs_queue; /* Dict that stores module configurations from .conf file until after modules are loaded during startup or arguments to loadex. */
list *loadmodule_queue; /* List of modules to load at startup. */
int module_pipe[2]; /* Pipe used to awake the event loop by module threads. */
pid_t child_pid; /* PID of current child */
int child_type; /* Type of current child */
/* Networking */
int port; /* TCP listening port */
int tls_port; /* TLS listening port */
int tcp_backlog; /* TCP listen() backlog */
char *bindaddr[CONFIG_BINDADDR_MAX]; /* Addresses we should bind to */
int bindaddr_count; /* Number of addresses in server.bindaddr[] */
char *bind_source_addr; /* Source address to bind on for outgoing connections */
char *unixsocket; /* UNIX socket path */
unsigned int unixsocketperm; /* UNIX socket permission (see mode_t) */
socketFds ipfd; /* TCP socket file descriptors */
socketFds tlsfd; /* TLS socket file descriptors */
int sofd; /* Unix socket file descriptor */
uint32_t socket_mark_id; /* ID for listen socket marking */
socketFds cfd; /* Cluster bus listening socket */
list *clients; /* List of active clients */
list *clients_to_close; /* Clients to close asynchronously */
list *clients_pending_write; /* There is to write or install handler. */
list *clients_pending_read; /* Client has pending read socket buffers. */
list *slaves, *monitors; /* List of slaves and MONITORs */
client *current_client; /* Current client executing the command. */
/* Stuff for client mem eviction */
clientMemUsageBucket client_mem_usage_buckets[CLIENT_MEM_USAGE_BUCKETS];
rax *clients_timeout_table; /* Radix tree for blocked clients timeouts. */
long fixed_time_expire; /* If > 0, expire keys against server.mstime. */
int in_nested_call; /* If > 0, in a nested call of a call */
rax *clients_index; /* Active clients dictionary by client ID. */
pause_type client_pause_type; /* True if clients are currently paused */
list *postponed_clients; /* List of postponed clients */
mstime_t client_pause_end_time; /* Time when we undo clients_paused */
pause_event *client_pause_per_purpose[NUM_PAUSE_PURPOSES];
char neterr[ANET_ERR_LEN]; /* Error buffer for anet.c */
dict *migrate_cached_sockets;/* MIGRATE cached sockets */
redisAtomic uint64_t next_client_id; /* Next client unique ID. Incremental. */
int protected_mode; /* Don't accept external connections. */
int io_threads_num; /* Number of IO threads to use. */
int io_threads_do_reads; /* Read and parse from IO threads? */
int io_threads_active; /* Is IO threads currently active? */
long long events_processed_while_blocked; /* processEventsWhileBlocked() */
int enable_protected_configs; /* Enable the modification of protected configs, see PROTECTED_ACTION_ALLOWED_* */
int enable_debug_cmd; /* Enable DEBUG commands, see PROTECTED_ACTION_ALLOWED_* */
int enable_module_cmd; /* Enable MODULE commands, see PROTECTED_ACTION_ALLOWED_* */
/* RDB / AOF loading information */
volatile sig_atomic_t loading; /* We are loading data from disk if true */
volatile sig_atomic_t async_loading; /* We are loading data without blocking the db being served */
off_t loading_total_bytes;
off_t loading_rdb_used_mem;
off_t loading_loaded_bytes;
time_t loading_start_time;
off_t loading_process_events_interval_bytes;
/* Fields used only for stats */
time_t stat_starttime; /* Server start time */
long long stat_numcommands; /* Number of processed commands */
long long stat_numconnections; /* Number of connections received */
long long stat_expiredkeys; /* Number of expired keys */
double stat_expired_stale_perc; /* Percentage of keys probably expired */
long long stat_expired_time_cap_reached_count; /* Early expire cycle stops.*/
long long stat_expire_cycle_time_used; /* Cumulative microseconds used. */
long long stat_evictedkeys; /* Number of evicted keys (maxmemory) */
long long stat_evictedclients; /* Number of evicted clients */
long long stat_total_eviction_exceeded_time; /* Total time over the memory limit, unit us */
monotime stat_last_eviction_exceeded_time; /* Timestamp of current eviction start, unit us */
long long stat_keyspace_hits; /* Number of successful lookups of keys */
long long stat_keyspace_misses; /* Number of failed lookups of keys */
long long stat_active_defrag_hits; /* number of allocations moved */
long long stat_active_defrag_misses; /* number of allocations scanned but not moved */
long long stat_active_defrag_key_hits; /* number of keys with moved allocations */
long long stat_active_defrag_key_misses;/* number of keys scanned and not moved */
long long stat_active_defrag_scanned; /* number of dictEntries scanned */
long long stat_total_active_defrag_time; /* Total time memory fragmentation over the limit, unit us */
monotime stat_last_active_defrag_time; /* Timestamp of current active defrag start */
size_t stat_peak_memory; /* Max used memory record */
long long stat_aof_rewrites; /* number of aof file rewrites performed */
long long stat_aofrw_consecutive_failures; /* The number of consecutive failures of aofrw */
long long stat_rdb_saves; /* number of rdb saves performed */
long long stat_fork_time; /* Time needed to perform latest fork() */
double stat_fork_rate; /* Fork rate in GB/sec. */
long long stat_total_forks; /* Total count of fork. */
long long stat_rejected_conn; /* Clients rejected because of maxclients */
long long stat_sync_full; /* Number of full resyncs with slaves. */
long long stat_sync_partial_ok; /* Number of accepted PSYNC requests. */
long long stat_sync_partial_err;/* Number of unaccepted PSYNC requests. */
list *slowlog; /* SLOWLOG list of commands */
long long slowlog_entry_id; /* SLOWLOG current entry ID */
long long slowlog_log_slower_than; /* SLOWLOG time limit (to get logged) */
unsigned long slowlog_max_len; /* SLOWLOG max number of items logged */
struct malloc_stats cron_malloc_stats; /* sampled in serverCron(). */
redisAtomic long long stat_net_input_bytes; /* Bytes read from network. */
redisAtomic long long stat_net_output_bytes; /* Bytes written to network. */
size_t stat_current_cow_peak; /* Peak size of copy on write bytes. */
size_t stat_current_cow_bytes; /* Copy on write bytes while child is active. */
monotime stat_current_cow_updated; /* Last update time of stat_current_cow_bytes */
size_t stat_current_save_keys_processed; /* Processed keys while child is active. */
size_t stat_current_save_keys_total; /* Number of keys when child started. */
size_t stat_rdb_cow_bytes; /* Copy on write bytes during RDB saving. */
size_t stat_aof_cow_bytes; /* Copy on write bytes during AOF rewrite. */
size_t stat_module_cow_bytes; /* Copy on write bytes during module fork. */
double stat_module_progress; /* Module save progress. */
size_t stat_clients_type_memory[CLIENT_TYPE_COUNT];/* Mem usage by type */
size_t stat_cluster_links_memory; /* Mem usage by cluster links */
long long stat_unexpected_error_replies; /* Number of unexpected (aof-loading, replica to master, etc.) error replies */
long long stat_total_error_replies; /* Total number of issued error replies ( command + rejected errors ) */
long long stat_dump_payload_sanitizations; /* Number deep dump payloads integrity validations. */
long long stat_io_reads_processed; /* Number of read events processed by IO / Main threads */
long long stat_io_writes_processed; /* Number of write events processed by IO / Main threads */
redisAtomic long long stat_total_reads_processed; /* Total number of read events processed */
redisAtomic long long stat_total_writes_processed; /* Total number of write events processed */
/* The following two are used to track instantaneous metrics, like
* number of operations per second, network traffic. */
struct {
long long last_sample_time; /* Timestamp of last sample in ms */
long long last_sample_count;/* Count in last sample */
long long samples[STATS_METRIC_SAMPLES];
int idx;
} inst_metric[STATS_METRIC_COUNT];
long long stat_reply_buffer_shrinks; /* Total number of output buffer shrinks */
long long stat_reply_buffer_expands; /* Total number of output buffer expands */
/* Configuration */
int verbosity; /* Loglevel in redis.conf */
int maxidletime; /* Client timeout in seconds */
int tcpkeepalive; /* Set SO_KEEPALIVE if non-zero. */
int active_expire_enabled; /* Can be disabled for testing purposes. */
int active_expire_effort; /* From 1 (default) to 10, active effort. */
int active_defrag_enabled;
int sanitize_dump_payload; /* Enables deep sanitization for ziplist and listpack in RDB and RESTORE. */
int skip_checksum_validation; /* Disable checksum validation for RDB and RESTORE payload. */
int jemalloc_bg_thread; /* Enable jemalloc background thread */
size_t active_defrag_ignore_bytes; /* minimum amount of fragmentation waste to start active defrag */
int active_defrag_threshold_lower; /* minimum percentage of fragmentation to start active defrag */
int active_defrag_threshold_upper; /* maximum percentage of fragmentation at which we use maximum effort */
int active_defrag_cycle_min; /* minimal effort for defrag in CPU percentage */
int active_defrag_cycle_max; /* maximal effort for defrag in CPU percentage */
unsigned long active_defrag_max_scan_fields; /* maximum number of fields of set/hash/zset/list to process from within the main dict scan */
size_t client_max_querybuf_len; /* Limit for client query buffer length */
int dbnum; /* Total number of configured DBs */
int supervised; /* 1 if supervised, 0 otherwise. */
int supervised_mode; /* See SUPERVISED_* */
int daemonize; /* True if running as a daemon */
int set_proc_title; /* True if change proc title */
char *proc_title_template; /* Process title template format */
clientBufferLimitsConfig client_obuf_limits[CLIENT_TYPE_OBUF_COUNT];
int pause_cron; /* Don't run cron tasks (debug) */
int latency_tracking_enabled; /* 1 if extended latency tracking is enabled, 0 otherwise. */
double *latency_tracking_info_percentiles; /* Extended latency tracking info output percentile list configuration. */
int latency_tracking_info_percentiles_len;
/* AOF persistence */
int aof_enabled; /* AOF configuration */
int aof_state; /* AOF_(ON|OFF|WAIT_REWRITE) */
int aof_fsync; /* Kind of fsync() policy */
char *aof_filename; /* Basename of the AOF file and manifest file */
char *aof_dirname; /* Name of the AOF directory */
int aof_no_fsync_on_rewrite; /* Don't fsync if a rewrite is in prog. */
int aof_rewrite_perc; /* Rewrite AOF if % growth is > M and... */
off_t aof_rewrite_min_size; /* the AOF file is at least N bytes. */
off_t aof_rewrite_base_size; /* AOF size on latest startup or rewrite. */
off_t aof_current_size; /* AOF current size (Including BASE + INCRs). */
off_t aof_last_incr_size; /* The size of the latest incr AOF. */
off_t aof_fsync_offset; /* AOF offset which is already synced to disk. */
int aof_flush_sleep; /* Micros to sleep before flush. (used by tests) */
int aof_rewrite_scheduled; /* Rewrite once BGSAVE terminates. */
sds aof_buf; /* AOF buffer, written before entering the event loop */
int aof_fd; /* File descriptor of currently selected AOF file */
int aof_selected_db; /* Currently selected DB in AOF */
time_t aof_flush_postponed_start; /* UNIX time of postponed AOF flush */
time_t aof_last_fsync; /* UNIX time of last fsync() */
time_t aof_rewrite_time_last; /* Time used by last AOF rewrite run. */
time_t aof_rewrite_time_start; /* Current AOF rewrite start time. */
time_t aof_cur_timestamp; /* Current record timestamp in AOF */
int aof_timestamp_enabled; /* Enable record timestamp in AOF */
int aof_lastbgrewrite_status; /* C_OK or C_ERR */
unsigned long aof_delayed_fsync; /* delayed AOF fsync() counter */
int aof_rewrite_incremental_fsync;/* fsync incrementally while aof rewriting? */
int rdb_save_incremental_fsync; /* fsync incrementally while rdb saving? */
int aof_last_write_status; /* C_OK or C_ERR */
int aof_last_write_errno; /* Valid if aof write/fsync status is ERR */
int aof_load_truncated; /* Don't stop on unexpected AOF EOF. */
int aof_use_rdb_preamble; /* Specify base AOF to use RDB encoding on AOF rewrites. */
redisAtomic int aof_bio_fsync_status; /* Status of AOF fsync in bio job. */
redisAtomic int aof_bio_fsync_errno; /* Errno of AOF fsync in bio job. */
aofManifest *aof_manifest; /* Used to track AOFs. */
int aof_disable_auto_gc; /* If disable automatically deleting HISTORY type AOFs?
default no. (for testings). */
/* RDB persistence */
long long dirty; /* Changes to DB from the last save */
long long dirty_before_bgsave; /* Used to restore dirty on failed BGSAVE */
long long rdb_last_load_keys_expired; /* number of expired keys when loading RDB */
long long rdb_last_load_keys_loaded; /* number of loaded keys when loading RDB */
struct saveparam *saveparams; /* Save points array for RDB */
int saveparamslen; /* Number of saving points */
char *rdb_filename; /* Name of RDB file */
int rdb_compression; /* Use compression in RDB? */
int rdb_checksum; /* Use RDB checksum? */
int rdb_del_sync_files; /* Remove RDB files used only for SYNC if
the instance does not use persistence. */
time_t lastsave; /* Unix time of last successful save */
time_t lastbgsave_try; /* Unix time of last attempted bgsave */
time_t rdb_save_time_last; /* Time used by last RDB save run. */
time_t rdb_save_time_start; /* Current RDB save start time. */
int rdb_bgsave_scheduled; /* BGSAVE when possible if true. */
int rdb_child_type; /* Type of save by active child. */
int lastbgsave_status; /* C_OK or C_ERR */
int stop_writes_on_bgsave_err; /* Don't allow writes if can't BGSAVE */
int rdb_pipe_read; /* RDB pipe used to transfer the rdb data */
/* to the parent process in diskless repl. */
int rdb_child_exit_pipe; /* Used by the diskless parent allow child exit. */
connection **rdb_pipe_conns; /* Connections which are currently the */
int rdb_pipe_numconns; /* target of diskless rdb fork child. */
int rdb_pipe_numconns_writing; /* Number of rdb conns with pending writes. */
char *rdb_pipe_buff; /* In diskless replication, this buffer holds data */
int rdb_pipe_bufflen; /* that was read from the rdb pipe. */
int rdb_key_save_delay; /* Delay in microseconds between keys while
* writing the RDB. (for testings). negative
* value means fractions of microseconds (on average). */
int key_load_delay; /* Delay in microseconds between keys while
* loading aof or rdb. (for testings). negative
* value means fractions of microseconds (on average). */
/* Pipe and data structures for child -> parent info sharing. */
int child_info_pipe[2]; /* Pipe used to write the child_info_data. */
int child_info_nread; /* Num of bytes of the last read from pipe */
/* Propagation of commands in AOF / replication */
redisOpArray also_propagate; /* Additional command to propagate. */
int replication_allowed; /* Are we allowed to replicate? */
/* Logging */
char *logfile; /* Path of log file */
int syslog_enabled; /* Is syslog enabled? */
char *syslog_ident; /* Syslog ident */
int syslog_facility; /* Syslog facility */
int crashlog_enabled; /* Enable signal handler for crashlog.
* disable for clean core dumps. */
int memcheck_enabled; /* Enable memory check on crash. */
int use_exit_on_panic; /* Use exit() on panic and assert rather than
* abort(). useful for Valgrind. */
/* Shutdown */
int shutdown_timeout; /* Graceful shutdown time limit in seconds. */
int shutdown_on_sigint; /* Shutdown flags configured for SIGINT. */
int shutdown_on_sigterm; /* Shutdown flags configured for SIGTERM. */
/* Replication (master) */
char replid[CONFIG_RUN_ID_SIZE+1]; /* My current replication ID. */
char replid2[CONFIG_RUN_ID_SIZE+1]; /* replid inherited from master*/
long long master_repl_offset; /* My current replication offset */
long long second_replid_offset; /* Accept offsets up to this for replid2. */
int slaveseldb; /* Last SELECTed DB in replication output */
int repl_ping_slave_period; /* Master pings the slave every N seconds */
replBacklog *repl_backlog; /* Replication backlog for partial syncs */
long long repl_backlog_size; /* Backlog circular buffer size */
time_t repl_backlog_time_limit; /* Time without slaves after the backlog
gets released. */
time_t repl_no_slaves_since; /* We have no slaves since that time.
Only valid if server.slaves len is 0. */
int repl_min_slaves_to_write; /* Min number of slaves to write. */
int repl_min_slaves_max_lag; /* Max lag of <count> slaves to write. */
int repl_good_slaves_count; /* Number of slaves with lag <= max_lag. */
int repl_diskless_sync; /* Master send RDB to slaves sockets directly. */
int repl_diskless_load; /* Slave parse RDB directly from the socket.
* see REPL_DISKLESS_LOAD_* enum */
int repl_diskless_sync_delay; /* Delay to start a diskless repl BGSAVE. */
int repl_diskless_sync_max_replicas;/* Max replicas for diskless repl BGSAVE
* delay (start sooner if they all connect). */
size_t repl_buffer_mem; /* The memory of replication buffer. */
list *repl_buffer_blocks; /* Replication buffers blocks list
* (serving replica clients and repl backlog) */
/* Replication (slave) */
char *masteruser; /* AUTH with this user and masterauth with master */
sds masterauth; /* AUTH with this password with master */
char *masterhost; /* Hostname of master */
int masterport; /* Port of master */
int repl_timeout; /* Timeout after N seconds of master idle */
client *master; /* Client that is master for this slave */
client *cached_master; /* Cached master to be reused for PSYNC. */
int repl_syncio_timeout; /* Timeout for synchronous I/O calls */
int repl_state; /* Replication status if the instance is a slave */
off_t repl_transfer_size; /* Size of RDB to read from master during sync. */
off_t repl_transfer_read; /* Amount of RDB read from master during sync. */
off_t repl_transfer_last_fsync_off; /* Offset when we fsync-ed last time. */
connection *repl_transfer_s; /* Slave -> Master SYNC connection */
int repl_transfer_fd; /* Slave -> Master SYNC temp file descriptor */
char *repl_transfer_tmpfile; /* Slave-> master SYNC temp file name */
time_t repl_transfer_lastio; /* Unix time of the latest read, for timeout */
int repl_serve_stale_data; /* Serve stale data when link is down? */
int repl_slave_ro; /* Slave is read only? */
int repl_slave_ignore_maxmemory; /* If true slaves do not evict. */
time_t repl_down_since; /* Unix time at which link with master went down */
int repl_disable_tcp_nodelay; /* Disable TCP_NODELAY after SYNC? */
int slave_priority; /* Reported in INFO and used by Sentinel. */
int replica_announced; /* If true, replica is announced by Sentinel */
int slave_announce_port; /* Give the master this listening port. */
char *slave_announce_ip; /* Give the master this ip address. */
int propagation_error_behavior; /* Configures the behavior of the replica
* when it receives an error on the replication stream */
int repl_ignore_disk_write_error; /* Configures whether replicas panic when unable to
* persist writes to AOF. */
/* The following two fields is where we store master PSYNC replid/offset
* while the PSYNC is in progress. At the end we'll copy the fields into
* the server->master client structure. */
char master_replid[CONFIG_RUN_ID_SIZE+1]; /* Master PSYNC runid. */
long long master_initial_offset; /* Master PSYNC offset. */
int repl_slave_lazy_flush; /* Lazy FLUSHALL before loading DB? */
/* Synchronous replication. */
list *clients_waiting_acks; /* Clients waiting in WAIT command. */
int get_ack_from_slaves; /* If true we send REPLCONF GETACK. */
/* Limits */
unsigned int maxclients; /* Max number of simultaneous clients */
unsigned long long maxmemory; /* Max number of memory bytes to use */
ssize_t maxmemory_clients; /* Memory limit for total client buffers */
int maxmemory_policy; /* Policy for key eviction */
int maxmemory_samples; /* Precision of random sampling */
int maxmemory_eviction_tenacity;/* Aggressiveness of eviction processing */
int lfu_log_factor; /* LFU logarithmic counter factor. */
int lfu_decay_time; /* LFU counter decay factor. */
long long proto_max_bulk_len; /* Protocol bulk length maximum size. */
int oom_score_adj_values[CONFIG_OOM_COUNT]; /* Linux oom_score_adj configuration */
int oom_score_adj; /* If true, oom_score_adj is managed */
int disable_thp; /* If true, disable THP by syscall */
/* Blocked clients */
unsigned int blocked_clients; /* # of clients executing a blocking cmd.*/
unsigned int blocked_clients_by_type[BLOCKED_NUM];
list *unblocked_clients; /* list of clients to unblock before next loop */
list *ready_keys; /* List of readyList structures for BLPOP & co */
/* Client side caching. */
unsigned int tracking_clients; /* # of clients with tracking enabled.*/
size_t tracking_table_max_keys; /* Max number of keys in tracking table. */
list *tracking_pending_keys; /* tracking invalidation keys pending to flush */
/* Sort parameters - qsort_r() is only available under BSD so we
* have to take this state global, in order to pass it to sortCompare() */
int sort_desc;
int sort_alpha;
int sort_bypattern;
int sort_store;
/* Zip structure config, see redis.conf for more information */
size_t hash_max_listpack_entries;
size_t hash_max_listpack_value;
size_t set_max_intset_entries;
size_t zset_max_listpack_entries;
size_t zset_max_listpack_value;
size_t hll_sparse_max_bytes;
size_t stream_node_max_bytes;
long long stream_node_max_entries;
/* List parameters */
int list_max_listpack_size;
int list_compress_depth;
/* time cache */
redisAtomic time_t unixtime; /* Unix time sampled every cron cycle. */
time_t timezone; /* Cached timezone. As set by tzset(). */
int daylight_active; /* Currently in daylight saving time. */
mstime_t mstime; /* 'unixtime' in milliseconds. */
ustime_t ustime; /* 'unixtime' in microseconds. */
size_t blocking_op_nesting; /* Nesting level of blocking operation, used to reset blocked_last_cron. */
long long blocked_last_cron; /* Indicate the mstime of the last time we did cron jobs from a blocking operation */
/* Pubsub */
dict *pubsub_channels; /* Map channels to list of subscribed clients */
dict *pubsub_patterns; /* A dict of pubsub_patterns */
int notify_keyspace_events; /* Events to propagate via Pub/Sub. This is an
xor of NOTIFY_... flags. */
dict *pubsubshard_channels; /* Map channels to list of subscribed clients */
/* Cluster */
int cluster_enabled; /* Is cluster enabled? */
int cluster_port; /* Set the cluster port for a node. */
mstime_t cluster_node_timeout; /* Cluster node timeout. */
char *cluster_configfile; /* Cluster auto-generated config file name. */
struct clusterState *cluster; /* State of the cluster */
int cluster_migration_barrier; /* Cluster replicas migration barrier. */
int cluster_allow_replica_migration; /* Automatic replica migrations to orphaned masters and from empty masters */
int cluster_slave_validity_factor; /* Slave max data age for failover. */
int cluster_require_full_coverage; /* If true, put the cluster down if
there is at least an uncovered slot.*/
int cluster_slave_no_failover; /* Prevent slave from starting a failover
if the master is in failure state. */
char *cluster_announce_ip; /* IP address to announce on cluster bus. */
char *cluster_announce_hostname; /* hostname to announce on cluster bus. */
int cluster_preferred_endpoint_type; /* Use the announced hostname when available. */
int cluster_announce_port; /* base port to announce on cluster bus. */
int cluster_announce_tls_port; /* TLS port to announce on cluster bus. */
int cluster_announce_bus_port; /* bus port to announce on cluster bus. */
int cluster_module_flags; /* Set of flags that Redis modules are able
to set in order to suppress certain
native Redis Cluster features. Check the
REDISMODULE_CLUSTER_FLAG_*. */
int cluster_allow_reads_when_down; /* Are reads allowed when the cluster
is down? */
int cluster_config_file_lock_fd; /* cluster config fd, will be flock */
unsigned long long cluster_link_sendbuf_limit_bytes; /* Memory usage limit on individual link send buffers*/
int cluster_drop_packet_filter; /* Debug config that allows tactically
* dropping packets of a specific type */
/* Scripting */
client *script_caller; /* The client running script right now, or NULL */
mstime_t busy_reply_threshold; /* Script / module timeout in milliseconds */
int script_oom; /* OOM detected when script start */
int script_disable_deny_script; /* Allow running commands marked "no-script" inside a script. */
/* Lazy free */
int lazyfree_lazy_eviction;
int lazyfree_lazy_expire;
int lazyfree_lazy_server_del;
int lazyfree_lazy_user_del;
int lazyfree_lazy_user_flush;
/* Latency monitor */
long long latency_monitor_threshold;
dict *latency_events;
/* ACLs */
char *acl_filename; /* ACL Users file. NULL if not configured. */
unsigned long acllog_max_len; /* Maximum length of the ACL LOG list. */
sds requirepass; /* Remember the cleartext password set with
the old "requirepass" directive for
backward compatibility with Redis <= 5. */
int acl_pubsub_default; /* Default ACL pub/sub channels flag */
/* Assert & bug reporting */
int watchdog_period; /* Software watchdog period in ms. 0 = off */
/* System hardware info */
size_t system_memory_size; /* Total memory in system as reported by OS */
/* TLS Configuration */
int tls_cluster;
int tls_replication;
int tls_auth_clients;
redisTLSContextConfig tls_ctx_config;
/* cpu affinity */
char *server_cpulist; /* cpu affinity list of redis server main/io thread. */
char *bio_cpulist; /* cpu affinity list of bio thread. */
char *aof_rewrite_cpulist; /* cpu affinity list of aof rewrite process. */
char *bgsave_cpulist; /* cpu affinity list of bgsave process. */
/* Sentinel config */
struct sentinelConfig *sentinel_config; /* sentinel config to load at startup time. */
/* Coordinate failover info */
mstime_t failover_end_time; /* Deadline for failover command. */
int force_failover; /* If true then failover will be forced at the
* deadline, otherwise failover is aborted. */
char *target_replica_host; /* Failover target host. If null during a
* failover then any replica can be used. */
int target_replica_port; /* Failover target port */
int failover_state; /* Failover state */
int cluster_allow_pubsubshard_when_down; /* Is pubsubshard allowed when the cluster
is down, doesn't affect pubsub global. */
long reply_buffer_peak_reset_time; /* The amount of time (in milliseconds) to wait between reply buffer peak resets */
int reply_buffer_resizing_enabled; /* Is reply buffer resizing enabled (1 by default) */
};
#define MAX_KEYS_BUFFER 256
typedef struct {
int pos; /* The position of the key within the client array */
int flags; /* The flags associated with the key access, see
CMD_KEY_* for more information */
} keyReference;
/* A result structure for the various getkeys function calls. It lists the
* keys as indices to the provided argv. This functionality is also re-used
* for returning channel information.
*/
typedef struct {
keyReference keysbuf[MAX_KEYS_BUFFER]; /* Pre-allocated buffer, to save heap allocations */
keyReference *keys; /* Key indices array, points to keysbuf or heap */
int numkeys; /* Number of key indices return */
int size; /* Available array size */
} getKeysResult;
#define GETKEYS_RESULT_INIT { {{0}}, NULL, 0, MAX_KEYS_BUFFER }
/* Key specs definitions.
*
* Brief: This is a scheme that tries to describe the location
* of key arguments better than the old [first,last,step] scheme
* which is limited and doesn't fit many commands.
*
* There are two steps:
* 1. begin_search (BS): in which index should we start searching for keys?
* 2. find_keys (FK): relative to the output of BS, how can we will which args are keys?
*
* There are two types of BS:
* 1. index: key args start at a constant index
* 2. keyword: key args start just after a specific keyword
*
* There are two kinds of FK:
* 1. range: keys end at a specific index (or relative to the last argument)
* 2. keynum: there's an arg that contains the number of key args somewhere before the keys themselves
*/
/* Must be synced with generate-command-code.py */
typedef enum {
KSPEC_BS_INVALID = 0, /* Must be 0 */
KSPEC_BS_UNKNOWN,
KSPEC_BS_INDEX,
KSPEC_BS_KEYWORD
} kspec_bs_type;
/* Must be synced with generate-command-code.py */
typedef enum {
KSPEC_FK_INVALID = 0, /* Must be 0 */
KSPEC_FK_UNKNOWN,
KSPEC_FK_RANGE,
KSPEC_FK_KEYNUM
} kspec_fk_type;
typedef struct {
/* Declarative data */
const char *notes;
uint64_t flags;
kspec_bs_type begin_search_type;
union {
struct {
/* The index from which we start the search for keys */
int pos;
} index;
struct {
/* The keyword that indicates the beginning of key args */
const char *keyword;
/* An index in argv from which to start searching.
* Can be negative, which means start search from the end, in reverse
* (Example: -2 means to start in reverse from the penultimate arg) */
int startfrom;
} keyword;
} bs;
kspec_fk_type find_keys_type;
union {
/* NOTE: Indices in this struct are relative to the result of the begin_search step!
* These are: range.lastkey, keynum.keynumidx, keynum.firstkey */
struct {
/* Index of the last key.
* Can be negative, in which case it's not relative. -1 indicating till the last argument,
* -2 one before the last and so on. */
int lastkey;
/* How many args should we skip after finding a key, in order to find the next one. */
int keystep;
/* If lastkey is -1, we use limit to stop the search by a factor. 0 and 1 mean no limit.
* 2 means 1/2 of the remaining args, 3 means 1/3, and so on. */
int limit;
} range;
struct {
/* Index of the argument containing the number of keys to come */
int keynumidx;
/* Index of the fist key (Usually it's just after keynumidx, in
* which case it should be set to keynumidx+1). */
int firstkey;
/* How many args should we skip after finding a key, in order to find the next one. */
int keystep;
} keynum;
} fk;
} keySpec;
/* Number of static key specs */
#define STATIC_KEY_SPECS_NUM 4
/* Must be synced with ARG_TYPE_STR and generate-command-code.py */
typedef enum {
ARG_TYPE_STRING,
ARG_TYPE_INTEGER,
ARG_TYPE_DOUBLE,
ARG_TYPE_KEY, /* A string, but represents a keyname */
ARG_TYPE_PATTERN,
ARG_TYPE_UNIX_TIME,
ARG_TYPE_PURE_TOKEN,
ARG_TYPE_ONEOF, /* Has subargs */
ARG_TYPE_BLOCK /* Has subargs */
} redisCommandArgType;
#define CMD_ARG_NONE (0)
#define CMD_ARG_OPTIONAL (1<<0)
#define CMD_ARG_MULTIPLE (1<<1)
#define CMD_ARG_MULTIPLE_TOKEN (1<<2)
typedef struct redisCommandArg {
const char *name;
redisCommandArgType type;
int key_spec_index;
const char *token;
const char *summary;
const char *since;
int flags;
const char *deprecated_since;
struct redisCommandArg *subargs;
/* runtime populated data */
int num_args;
} redisCommandArg;
/* Must be synced with RESP2_TYPE_STR and generate-command-code.py */
typedef enum {
RESP2_SIMPLE_STRING,
RESP2_ERROR,
RESP2_INTEGER,
RESP2_BULK_STRING,
RESP2_NULL_BULK_STRING,
RESP2_ARRAY,
RESP2_NULL_ARRAY,
} redisCommandRESP2Type;
/* Must be synced with RESP3_TYPE_STR and generate-command-code.py */
typedef enum {
RESP3_SIMPLE_STRING,
RESP3_ERROR,
RESP3_INTEGER,
RESP3_DOUBLE,
RESP3_BULK_STRING,
RESP3_ARRAY,
RESP3_MAP,
RESP3_SET,
RESP3_BOOL,
RESP3_NULL,
} redisCommandRESP3Type;
typedef struct {
const char *since;
const char *changes;
} commandHistory;
/* Must be synced with COMMAND_GROUP_STR and generate-command-code.py */
typedef enum {
COMMAND_GROUP_GENERIC,
COMMAND_GROUP_STRING,
COMMAND_GROUP_LIST,
COMMAND_GROUP_SET,
COMMAND_GROUP_SORTED_SET,
COMMAND_GROUP_HASH,
COMMAND_GROUP_PUBSUB,
COMMAND_GROUP_TRANSACTIONS,
COMMAND_GROUP_CONNECTION,
COMMAND_GROUP_SERVER,
COMMAND_GROUP_SCRIPTING,
COMMAND_GROUP_HYPERLOGLOG,
COMMAND_GROUP_CLUSTER,
COMMAND_GROUP_SENTINEL,
COMMAND_GROUP_GEO,
COMMAND_GROUP_STREAM,
COMMAND_GROUP_BITMAP,
COMMAND_GROUP_MODULE,
} redisCommandGroup;
typedef void redisCommandProc(client *c);
typedef int redisGetKeysProc(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
/* Redis command structure.
*
* Note that the command table is in commands.c and it is auto-generated.
*
* This is the meaning of the flags:
*
* CMD_WRITE: Write command (may modify the key space).
*
* CMD_READONLY: Commands just reading from keys without changing the content.
* Note that commands that don't read from the keyspace such as
* TIME, SELECT, INFO, administrative commands, and connection
* or transaction related commands (multi, exec, discard, ...)
* are not flagged as read-only commands, since they affect the
* server or the connection in other ways.
*
* CMD_DENYOOM: May increase memory usage once called. Don't allow if out
* of memory.
*
* CMD_ADMIN: Administrative command, like SAVE or SHUTDOWN.
*
* CMD_PUBSUB: Pub/Sub related command.
*
* CMD_NOSCRIPT: Command not allowed in scripts.
*
* CMD_BLOCKING: The command has the potential to block the client.
*
* CMD_LOADING: Allow the command while loading the database.
*
* CMD_NO_ASYNC_LOADING: Deny during async loading (when a replica uses diskless
* sync swapdb, and allows access to the old dataset)
*
* CMD_STALE: Allow the command while a slave has stale data but is not
* allowed to serve this data. Normally no command is accepted
* in this condition but just a few.
*
* CMD_SKIP_MONITOR: Do not automatically propagate the command on MONITOR.
*
* CMD_SKIP_SLOWLOG: Do not automatically propagate the command to the slowlog.
*
* CMD_ASKING: Perform an implicit ASKING for this command, so the
* command will be accepted in cluster mode if the slot is marked
* as 'importing'.
*
* CMD_FAST: Fast command: O(1) or O(log(N)) command that should never
* delay its execution as long as the kernel scheduler is giving
* us time. Note that commands that may trigger a DEL as a side
* effect (like SET) are not fast commands.
*
* CMD_NO_AUTH: Command doesn't require authentication
*
* CMD_MAY_REPLICATE: Command may produce replication traffic, but should be
* allowed under circumstances where write commands are disallowed.
* Examples include PUBLISH, which replicates pubsub messages,and
* EVAL, which may execute write commands, which are replicated,
* or may just execute read commands. A command can not be marked
* both CMD_WRITE and CMD_MAY_REPLICATE
*
* CMD_SENTINEL: This command is present in sentinel mode too.
*
* CMD_SENTINEL_ONLY: This command is present only when in sentinel mode.
*
* CMD_NO_MANDATORY_KEYS: This key arguments for this command are optional.
*
* CMD_NO_MULTI: The command is nt allowed inside a transaction
*
* The following additional flags are only used in order to put commands
* in a specific ACL category. Commands can have multiple ACL categories.
* See redis.conf for the exact meaning of each.
*
* @keyspace, @read, @write, @set, @sortedset, @list, @hash, @string, @bitmap,
* @hyperloglog, @stream, @admin, @fast, @slow, @pubsub, @blocking, @dangerous,
* @connection, @transaction, @scripting, @geo.
*
* Note that:
*
* 1) The read-only flag implies the @read ACL category.
* 2) The write flag implies the @write ACL category.
* 3) The fast flag implies the @fast ACL category.
* 4) The admin flag implies the @admin and @dangerous ACL category.
* 5) The pub-sub flag implies the @pubsub ACL category.
* 6) The lack of fast flag implies the @slow ACL category.
* 7) The non obvious "keyspace" category includes the commands
* that interact with keys without having anything to do with
* specific data structures, such as: DEL, RENAME, MOVE, SELECT,
* TYPE, EXPIRE*, PEXPIRE*, TTL, PTTL, ...
*/
struct redisCommand {
/* Declarative data */
const char *declared_name; /* A string representing the command declared_name.
* It is a const char * for native commands and SDS for module commands. */
const char *summary; /* Summary of the command (optional). */
const char *complexity; /* Complexity description (optional). */
const char *since; /* Debut version of the command (optional). */
int doc_flags; /* Flags for documentation (see CMD_DOC_*). */
const char *replaced_by; /* In case the command is deprecated, this is the successor command. */
const char *deprecated_since; /* In case the command is deprecated, when did it happen? */
redisCommandGroup group; /* Command group */
commandHistory *history; /* History of the command */
const char **tips; /* An array of strings that are meant to be tips for clients/proxies regarding this command */
redisCommandProc *proc; /* Command implementation */
int arity; /* Number of arguments, it is possible to use -N to say >= N */
uint64_t flags; /* Command flags, see CMD_*. */
uint64_t acl_categories; /* ACl categories, see ACL_CATEGORY_*. */
keySpec key_specs_static[STATIC_KEY_SPECS_NUM]; /* Key specs. See keySpec */
/* Use a function to determine keys arguments in a command line.
* Used for Redis Cluster redirect (may be NULL) */
redisGetKeysProc *getkeys_proc;
/* Array of subcommands (may be NULL) */
struct redisCommand *subcommands;
/* Array of arguments (may be NULL) */
struct redisCommandArg *args;
/* Runtime populated data */
/* What keys should be loaded in background when calling this command? */
long long microseconds, calls, rejected_calls, failed_calls;
int id; /* Command ID. This is a progressive ID starting from 0 that
is assigned at runtime, and is used in order to check
ACLs. A connection is able to execute a given command if
the user associated to the connection has this command
bit set in the bitmap of allowed commands. */
sds fullname; /* A SDS string representing the command fullname. */
struct hdr_histogram* latency_histogram; /*points to the command latency command histogram (unit of time nanosecond) */
keySpec *key_specs;
keySpec legacy_range_key_spec; /* The legacy (first,last,step) key spec is
* still maintained (if applicable) so that
* we can still support the reply format of
* COMMAND INFO and COMMAND GETKEYS */
int num_args;
int num_history;
int num_tips;
int key_specs_num;
int key_specs_max;
dict *subcommands_dict; /* A dictionary that holds the subcommands, the key is the subcommand sds name
* (not the fullname), and the value is the redisCommand structure pointer. */
struct redisCommand *parent;
};
struct redisError {
long long count;
};
struct redisFunctionSym {
char *name;
unsigned long pointer;
};
typedef struct _redisSortObject {
robj *obj;
union {
double score;
robj *cmpobj;
} u;
} redisSortObject;
typedef struct _redisSortOperation {
int type;
robj *pattern;
} redisSortOperation;
/* Structure to hold list iteration abstraction. */
typedef struct {
robj *subject;
unsigned char encoding;
unsigned char direction; /* Iteration direction */
quicklistIter *iter;
} listTypeIterator;
/* Structure for an entry while iterating over a list. */
typedef struct {
listTypeIterator *li;
quicklistEntry entry; /* Entry in quicklist */
} listTypeEntry;
/* Structure to hold set iteration abstraction. */
typedef struct {
robj *subject;
int encoding;
int ii; /* intset iterator */
dictIterator *di;
} setTypeIterator;
/* Structure to hold hash iteration abstraction. Note that iteration over
* hashes involves both fields and values. Because it is possible that
* not both are required, store pointers in the iterator to avoid
* unnecessary memory allocation for fields/values. */
typedef struct {
robj *subject;
int encoding;
unsigned char *fptr, *vptr;
dictIterator *di;
dictEntry *de;
} hashTypeIterator;
#include "stream.h" /* Stream data type header file. */
#define OBJ_HASH_KEY 1
#define OBJ_HASH_VALUE 2
#define IO_THREADS_OP_IDLE 0
#define IO_THREADS_OP_READ 1
#define IO_THREADS_OP_WRITE 2
extern int io_threads_op;
/*-----------------------------------------------------------------------------
* Extern declarations
*----------------------------------------------------------------------------*/
extern struct redisServer server;
extern struct sharedObjectsStruct shared;
extern dictType objectKeyPointerValueDictType;
extern dictType objectKeyHeapPointerValueDictType;
extern dictType setDictType;
extern dictType BenchmarkDictType;
extern dictType zsetDictType;
extern dictType dbDictType;
extern double R_Zero, R_PosInf, R_NegInf, R_Nan;
extern dictType hashDictType;
extern dictType stringSetDictType;
extern dictType externalStringType;
extern dictType sdsHashDictType;
extern dictType dbExpiresDictType;
extern dictType modulesDictType;
extern dictType sdsReplyDictType;
extern dict *modules;
/*-----------------------------------------------------------------------------
* Functions prototypes
*----------------------------------------------------------------------------*/
/* Command metadata */
void populateCommandLegacyRangeSpec(struct redisCommand *c);
int populateArgsStructure(struct redisCommandArg *args);
/* Modules */
void moduleInitModulesSystem(void);
void moduleInitModulesSystemLast(void);
void modulesCron(void);
int moduleLoad(const char *path, void **argv, int argc, int is_loadex);
int moduleUnload(sds name);
void moduleLoadFromQueue(void);
int moduleGetCommandKeysViaAPI(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int moduleGetCommandChannelsViaAPI(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
moduleType *moduleTypeLookupModuleByID(uint64_t id);
void moduleTypeNameByID(char *name, uint64_t moduleid);
const char *moduleTypeModuleName(moduleType *mt);
const char *moduleNameFromCommand(struct redisCommand *cmd);
void moduleFreeContext(struct RedisModuleCtx *ctx);
void unblockClientFromModule(client *c);
void moduleHandleBlockedClients(void);
void moduleBlockedClientTimedOut(client *c);
void modulePipeReadable(aeEventLoop *el, int fd, void *privdata, int mask);
size_t moduleCount(void);
void moduleAcquireGIL(void);
int moduleTryAcquireGIL(void);
void moduleReleaseGIL(void);
void moduleNotifyKeyspaceEvent(int type, const char *event, robj *key, int dbid);
void moduleCallCommandFilters(client *c);
void ModuleForkDoneHandler(int exitcode, int bysignal);
int TerminateModuleForkChild(int child_pid, int wait);
ssize_t rdbSaveModulesAux(rio *rdb, int when);
int moduleAllDatatypesHandleErrors();
int moduleAllModulesHandleReplAsyncLoad();
sds modulesCollectInfo(sds info, dict *sections_dict, int for_crash_report, int sections);
void moduleFireServerEvent(uint64_t eid, int subid, void *data);
void processModuleLoadingProgressEvent(int is_aof);
int moduleTryServeClientBlockedOnKey(client *c, robj *key);
void moduleUnblockClient(client *c);
int moduleBlockedClientMayTimeout(client *c);
int moduleClientIsBlockedOnKeys(client *c);
void moduleNotifyUserChanged(client *c);
void moduleNotifyKeyUnlink(robj *key, robj *val, int dbid);
size_t moduleGetFreeEffort(robj *key, robj *val, int dbid);
size_t moduleGetMemUsage(robj *key, robj *val, size_t sample_size, int dbid);
robj *moduleTypeDupOrReply(client *c, robj *fromkey, robj *tokey, int todb, robj *value);
int moduleDefragValue(robj *key, robj *obj, long *defragged, int dbid);
int moduleLateDefrag(robj *key, robj *value, unsigned long *cursor, long long endtime, long long *defragged, int dbid);
long moduleDefragGlobals(void);
void *moduleGetHandleByName(char *modulename);
int moduleIsModuleCommand(void *module_handle, struct redisCommand *cmd);
/* Utils */
long long ustime(void);
long long mstime(void);
void getRandomHexChars(char *p, size_t len);
void getRandomBytes(unsigned char *p, size_t len);
uint64_t crc64(uint64_t crc, const unsigned char *s, uint64_t l);
void exitFromChild(int retcode);
long long redisPopcount(void *s, long count);
int redisSetProcTitle(char *title);
int validateProcTitleTemplate(const char *template);
int redisCommunicateSystemd(const char *sd_notify_msg);
void redisSetCpuAffinity(const char *cpulist);
/* afterErrorReply flags */
#define ERR_REPLY_FLAG_NO_STATS_UPDATE (1ULL<<0) /* Indicating that we should not update
error stats after sending error reply */
/* networking.c -- Networking and Client related operations */
client *createClient(connection *conn);
void freeClient(client *c);
void freeClientAsync(client *c);
void logInvalidUseAndFreeClientAsync(client *c, const char *fmt, ...);
int beforeNextClient(client *c);
void clearClientConnectionState(client *c);
void resetClient(client *c);
void freeClientOriginalArgv(client *c);
void freeClientArgv(client *c);
void sendReplyToClient(connection *conn);
void *addReplyDeferredLen(client *c);
void setDeferredArrayLen(client *c, void *node, long length);
void setDeferredMapLen(client *c, void *node, long length);
void setDeferredSetLen(client *c, void *node, long length);
void setDeferredAttributeLen(client *c, void *node, long length);
void setDeferredPushLen(client *c, void *node, long length);
int processInputBuffer(client *c);
void acceptTcpHandler(aeEventLoop *el, int fd, void *privdata, int mask);
void acceptTLSHandler(aeEventLoop *el, int fd, void *privdata, int mask);
void acceptUnixHandler(aeEventLoop *el, int fd, void *privdata, int mask);
void readQueryFromClient(connection *conn);
int prepareClientToWrite(client *c);
void addReplyNull(client *c);
void addReplyNullArray(client *c);
void addReplyBool(client *c, int b);
void addReplyVerbatim(client *c, const char *s, size_t len, const char *ext);
void addReplyProto(client *c, const char *s, size_t len);
void AddReplyFromClient(client *c, client *src);
void addReplyBulk(client *c, robj *obj);
void addReplyBulkCString(client *c, const char *s);
void addReplyBulkCBuffer(client *c, const void *p, size_t len);
void addReplyBulkLongLong(client *c, long long ll);
void addReply(client *c, robj *obj);
void addReplySds(client *c, sds s);
void addReplyBulkSds(client *c, sds s);
void setDeferredReplyBulkSds(client *c, void *node, sds s);
void addReplyErrorObject(client *c, robj *err);
void addReplyOrErrorObject(client *c, robj *reply);
void afterErrorReply(client *c, const char *s, size_t len, int flags);
void addReplyErrorSdsEx(client *c, sds err, int flags);
void addReplyErrorSds(client *c, sds err);
void addReplyError(client *c, const char *err);
void addReplyErrorArity(client *c);
void addReplyErrorExpireTime(client *c);
void addReplyStatus(client *c, const char *status);
void addReplyDouble(client *c, double d);
void addReplyLongLongWithPrefix(client *c, long long ll, char prefix);
void addReplyBigNum(client *c, const char* num, size_t len);
void addReplyHumanLongDouble(client *c, long double d);
void addReplyLongLong(client *c, long long ll);
void addReplyArrayLen(client *c, long length);
void addReplyMapLen(client *c, long length);
void addReplySetLen(client *c, long length);
void addReplyAttributeLen(client *c, long length);
void addReplyPushLen(client *c, long length);
void addReplyHelp(client *c, const char **help);
void addReplySubcommandSyntaxError(client *c);
void addReplyLoadedModules(client *c);
void copyReplicaOutputBuffer(client *dst, client *src);
void addListRangeReply(client *c, robj *o, long start, long end, int reverse);
void deferredAfterErrorReply(client *c, list *errors);
size_t sdsZmallocSize(sds s);
size_t getStringObjectSdsUsedMemory(robj *o);
void freeClientReplyValue(void *o);
void *dupClientReplyValue(void *o);
char *getClientPeerId(client *client);
char *getClientSockName(client *client);
sds catClientInfoString(sds s, client *client);
sds getAllClientsInfoString(int type);
void rewriteClientCommandVector(client *c, int argc, ...);
void rewriteClientCommandArgument(client *c, int i, robj *newval);
void replaceClientCommandVector(client *c, int argc, robj **argv);
void redactClientCommandArgument(client *c, int argc);
size_t getClientOutputBufferMemoryUsage(client *c);
size_t getClientMemoryUsage(client *c, size_t *output_buffer_mem_usage);
int freeClientsInAsyncFreeQueue(void);
int closeClientOnOutputBufferLimitReached(client *c, int async);
int getClientType(client *c);
int getClientTypeByName(char *name);
char *getClientTypeName(int class);
void flushSlavesOutputBuffers(void);
void disconnectSlaves(void);
void evictClients(void);
int listenToPort(int port, socketFds *fds);
void pauseClients(pause_purpose purpose, mstime_t end, pause_type type);
void unpauseClients(pause_purpose purpose);
int areClientsPaused(void);
int checkClientPauseTimeoutAndReturnIfPaused(void);
void unblockPostponedClients();
void processEventsWhileBlocked(void);
void whileBlockedCron();
void blockingOperationStarts();
void blockingOperationEnds();
int handleClientsWithPendingWrites(void);
int handleClientsWithPendingWritesUsingThreads(void);
int handleClientsWithPendingReadsUsingThreads(void);
int stopThreadedIOIfNeeded(void);
int clientHasPendingReplies(client *c);
int islocalClient(client *c);
int updateClientMemUsage(client *c);
void updateClientMemUsageBucket(client *c);
void unlinkClient(client *c);
int writeToClient(client *c, int handler_installed);
void linkClient(client *c);
void protectClient(client *c);
void unprotectClient(client *c);
void initThreadedIO(void);
client *lookupClientByID(uint64_t id);
int authRequired(client *c);
void putClientInPendingWriteQueue(client *c);
#ifdef __GNUC__
void addReplyErrorFormatEx(client *c, int flags, const char *fmt, ...)
__attribute__((format(printf, 3, 4)));
void addReplyErrorFormat(client *c, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
void addReplyStatusFormat(client *c, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
#else
void addReplyErrorFormatEx(client *c, int flags, const char *fmt, ...);
void addReplyErrorFormat(client *c, const char *fmt, ...);
void addReplyStatusFormat(client *c, const char *fmt, ...);
#endif
/* Client side caching (tracking mode) */
void enableTracking(client *c, uint64_t redirect_to, uint64_t options, robj **prefix, size_t numprefix);
void disableTracking(client *c);
void trackingRememberKeys(client *c);
void trackingInvalidateKey(client *c, robj *keyobj, int bcast);
void trackingScheduleKeyInvalidation(uint64_t client_id, robj *keyobj);
void trackingHandlePendingKeyInvalidations(void);
void trackingInvalidateKeysOnFlush(int async);
void freeTrackingRadixTree(rax *rt);
void freeTrackingRadixTreeAsync(rax *rt);
void trackingLimitUsedSlots(void);
uint64_t trackingGetTotalItems(void);
uint64_t trackingGetTotalKeys(void);
uint64_t trackingGetTotalPrefixes(void);
void trackingBroadcastInvalidationMessages(void);
int checkPrefixCollisionsOrReply(client *c, robj **prefix, size_t numprefix);
/* List data type */
void listTypePush(robj *subject, robj *value, int where);
robj *listTypePop(robj *subject, int where);
unsigned long listTypeLength(const robj *subject);
listTypeIterator *listTypeInitIterator(robj *subject, long index, unsigned char direction);
void listTypeReleaseIterator(listTypeIterator *li);
void listTypeSetIteratorDirection(listTypeIterator *li, unsigned char direction);
int listTypeNext(listTypeIterator *li, listTypeEntry *entry);
robj *listTypeGet(listTypeEntry *entry);
void listTypeInsert(listTypeEntry *entry, robj *value, int where);
void listTypeReplace(listTypeEntry *entry, robj *value);
int listTypeEqual(listTypeEntry *entry, robj *o);
void listTypeDelete(listTypeIterator *iter, listTypeEntry *entry);
robj *listTypeDup(robj *o);
int listTypeDelRange(robj *o, long start, long stop);
void unblockClientWaitingData(client *c);
void popGenericCommand(client *c, int where);
void listElementsRemoved(client *c, robj *key, int where, robj *o, long count, int *deleted);
/* MULTI/EXEC/WATCH... */
void unwatchAllKeys(client *c);
void initClientMultiState(client *c);
void freeClientMultiState(client *c);
void queueMultiCommand(client *c);
size_t multiStateMemOverhead(client *c);
void touchWatchedKey(redisDb *db, robj *key);
int isWatchedKeyExpired(client *c);
void touchAllWatchedKeysInDb(redisDb *emptied, redisDb *replaced_with);
void discardTransaction(client *c);
void flagTransaction(client *c);
void execCommandAbort(client *c, sds error);
/* Redis object implementation */
void decrRefCount(robj *o);
void decrRefCountVoid(void *o);
void incrRefCount(robj *o);
robj *makeObjectShared(robj *o);
robj *resetRefCount(robj *obj);
void freeStringObject(robj *o);
void freeListObject(robj *o);
void freeSetObject(robj *o);
void freeZsetObject(robj *o);
void freeHashObject(robj *o);
void dismissObject(robj *o, size_t dump_size);
robj *createObject(int type, void *ptr);
robj *createStringObject(const char *ptr, size_t len);
robj *createRawStringObject(const char *ptr, size_t len);
robj *createEmbeddedStringObject(const char *ptr, size_t len);
robj *tryCreateRawStringObject(const char *ptr, size_t len);
robj *tryCreateStringObject(const char *ptr, size_t len);
robj *dupStringObject(const robj *o);
int isSdsRepresentableAsLongLong(sds s, long long *llval);
int isObjectRepresentableAsLongLong(robj *o, long long *llongval);
robj *tryObjectEncoding(robj *o);
robj *getDecodedObject(robj *o);
size_t stringObjectLen(robj *o);
robj *createStringObjectFromLongLong(long long value);
robj *createStringObjectFromLongLongForValue(long long value);
robj *createStringObjectFromLongDouble(long double value, int humanfriendly);
robj *createQuicklistObject(void);
robj *createSetObject(void);
robj *createIntsetObject(void);
robj *createHashObject(void);
robj *createZsetObject(void);
robj *createZsetListpackObject(void);
robj *createStreamObject(void);
robj *createModuleObject(moduleType *mt, void *value);
int getLongFromObjectOrReply(client *c, robj *o, long *target, const char *msg);
int getPositiveLongFromObjectOrReply(client *c, robj *o, long *target, const char *msg);
int getRangeLongFromObjectOrReply(client *c, robj *o, long min, long max, long *target, const char *msg);
int checkType(client *c, robj *o, int type);
int getLongLongFromObjectOrReply(client *c, robj *o, long long *target, const char *msg);
int getDoubleFromObjectOrReply(client *c, robj *o, double *target, const char *msg);
int getDoubleFromObject(const robj *o, double *target);
int getLongLongFromObject(robj *o, long long *target);
int getLongDoubleFromObject(robj *o, long double *target);
int getLongDoubleFromObjectOrReply(client *c, robj *o, long double *target, const char *msg);
int getIntFromObjectOrReply(client *c, robj *o, int *target, const char *msg);
char *strEncoding(int encoding);
int compareStringObjects(robj *a, robj *b);
int collateStringObjects(robj *a, robj *b);
int equalStringObjects(robj *a, robj *b);
unsigned long long estimateObjectIdleTime(robj *o);
void trimStringObjectIfNeeded(robj *o);
#define sdsEncodedObject(objptr) (objptr->encoding == OBJ_ENCODING_RAW || objptr->encoding == OBJ_ENCODING_EMBSTR)
/* Synchronous I/O with timeout */
ssize_t syncWrite(int fd, char *ptr, ssize_t size, long long timeout);
ssize_t syncRead(int fd, char *ptr, ssize_t size, long long timeout);
ssize_t syncReadLine(int fd, char *ptr, ssize_t size, long long timeout);
/* Replication */
void replicationFeedSlaves(list *slaves, int dictid, robj **argv, int argc);
void replicationFeedStreamFromMasterStream(char *buf, size_t buflen);
void resetReplicationBuffer(void);
void feedReplicationBuffer(char *buf, size_t len);
void freeReplicaReferencedReplBuffer(client *replica);
void replicationFeedMonitors(client *c, list *monitors, int dictid, robj **argv, int argc);
void updateSlavesWaitingBgsave(int bgsaveerr, int type);
void replicationCron(void);
void replicationStartPendingFork(void);
void replicationHandleMasterDisconnection(void);
void replicationCacheMaster(client *c);
void resizeReplicationBacklog();
void replicationSetMaster(char *ip, int port);
void replicationUnsetMaster(void);
void refreshGoodSlavesCount(void);
int checkGoodReplicasStatus(void);
void processClientsWaitingReplicas(void);
void unblockClientWaitingReplicas(client *c);
int replicationCountAcksByOffset(long long offset);
void replicationSendNewlineToMaster(void);
long long replicationGetSlaveOffset(void);
char *replicationGetSlaveName(client *c);
long long getPsyncInitialOffset(void);
int replicationSetupSlaveForFullResync(client *slave, long long offset);
void changeReplicationId(void);
void clearReplicationId2(void);
void createReplicationBacklog(void);
void freeReplicationBacklog(void);
void replicationCacheMasterUsingMyself(void);
void feedReplicationBacklog(void *ptr, size_t len);
void incrementalTrimReplicationBacklog(size_t blocks);
int canFeedReplicaReplBuffer(client *replica);
void rebaseReplicationBuffer(long long base_repl_offset);
void showLatestBacklog(void);
void rdbPipeReadHandler(struct aeEventLoop *eventLoop, int fd, void *clientData, int mask);
void rdbPipeWriteHandlerConnRemoved(struct connection *conn);
void clearFailoverState(void);
void updateFailoverStatus(void);
void abortFailover(const char *err);
const char *getFailoverStateString();
/* Generic persistence functions */
void startLoadingFile(size_t size, char* filename, int rdbflags);
void startLoading(size_t size, int rdbflags, int async);
void loadingAbsProgress(off_t pos);
void loadingIncrProgress(off_t size);
void stopLoading(int success);
void updateLoadingFileName(char* filename);
void startSaving(int rdbflags);
void stopSaving(int success);
int allPersistenceDisabled(void);
#define DISK_ERROR_TYPE_AOF 1 /* Don't accept writes: AOF errors. */
#define DISK_ERROR_TYPE_RDB 2 /* Don't accept writes: RDB errors. */
#define DISK_ERROR_TYPE_NONE 0 /* No problems, we can accept writes. */
int writeCommandsDeniedByDiskError(void);
sds writeCommandsGetDiskErrorMessage(int);
/* RDB persistence */
#include "rdb.h"
void killRDBChild(void);
int bg_unlink(const char *filename);
/* AOF persistence */
void flushAppendOnlyFile(int force);
void feedAppendOnlyFile(int dictid, robj **argv, int argc);
void aofRemoveTempFile(pid_t childpid);
int rewriteAppendOnlyFileBackground(void);
int loadAppendOnlyFiles(aofManifest *am);
void stopAppendOnly(void);
int startAppendOnly(void);
void backgroundRewriteDoneHandler(int exitcode, int bysignal);
ssize_t aofReadDiffFromParent(void);
void killAppendOnlyChild(void);
void restartAOFAfterSYNC();
void aofLoadManifestFromDisk(void);
void aofOpenIfNeededOnServerStart(void);
void aofManifestFree(aofManifest *am);
int aofDelHistoryFiles(void);
int aofRewriteLimited(void);
/* Child info */
void openChildInfoPipe(void);
void closeChildInfoPipe(void);
void sendChildInfoGeneric(childInfoType info_type, size_t keys, double progress, char *pname);
void sendChildCowInfo(childInfoType info_type, char *pname);
void sendChildInfo(childInfoType info_type, size_t keys, char *pname);
void receiveChildInfo(void);
/* Fork helpers */
int redisFork(int type);
int hasActiveChildProcess();
void resetChildState();
int isMutuallyExclusiveChildType(int type);
/* acl.c -- Authentication related prototypes. */
extern rax *Users;
extern user *DefaultUser;
void ACLInit(void);
/* Return values for ACLCheckAllPerm(). */
#define ACL_OK 0
#define ACL_DENIED_CMD 1
#define ACL_DENIED_KEY 2
#define ACL_DENIED_AUTH 3 /* Only used for ACL LOG entries. */
#define ACL_DENIED_CHANNEL 4 /* Only used for pub/sub commands */
/* Context values for addACLLogEntry(). */
#define ACL_LOG_CTX_TOPLEVEL 0
#define ACL_LOG_CTX_LUA 1
#define ACL_LOG_CTX_MULTI 2
#define ACL_LOG_CTX_MODULE 3
/* ACL key permission types */
#define ACL_READ_PERMISSION (1<<0)
#define ACL_WRITE_PERMISSION (1<<1)
#define ACL_ALL_PERMISSION (ACL_READ_PERMISSION|ACL_WRITE_PERMISSION)
int ACLCheckUserCredentials(robj *username, robj *password);
int ACLAuthenticateUser(client *c, robj *username, robj *password);
unsigned long ACLGetCommandID(sds cmdname);
void ACLClearCommandID(void);
user *ACLGetUserByName(const char *name, size_t namelen);
int ACLUserCheckKeyPerm(user *u, const char *key, int keylen, int flags);
int ACLUserCheckChannelPerm(user *u, sds channel, int literal);
int ACLCheckAllUserCommandPerm(user *u, struct redisCommand *cmd, robj **argv, int argc, int *idxptr);
int ACLUserCheckCmdWithUnrestrictedKeyAccess(user *u, struct redisCommand *cmd, robj **argv, int argc, int flags);
int ACLCheckAllPerm(client *c, int *idxptr);
int ACLSetUser(user *u, const char *op, ssize_t oplen);
uint64_t ACLGetCommandCategoryFlagByName(const char *name);
int ACLAppendUserForLoading(sds *argv, int argc, int *argc_err);
const char *ACLSetUserStringError(void);
int ACLLoadConfiguredUsers(void);
sds ACLDescribeUser(user *u);
void ACLLoadUsersAtStartup(void);
void addReplyCommandCategories(client *c, struct redisCommand *cmd);
user *ACLCreateUnlinkedUser();
void ACLFreeUserAndKillClients(user *u);
void addACLLogEntry(client *c, int reason, int context, int argpos, sds username, sds object);
const char* getAclErrorMessage(int acl_res);
void ACLUpdateDefaultUserPassword(sds password);
/* Sorted sets data type */
/* Input flags. */
#define ZADD_IN_NONE 0
#define ZADD_IN_INCR (1<<0) /* Increment the score instead of setting it. */
#define ZADD_IN_NX (1<<1) /* Don't touch elements not already existing. */
#define ZADD_IN_XX (1<<2) /* Only touch elements already existing. */
#define ZADD_IN_GT (1<<3) /* Only update existing when new scores are higher. */
#define ZADD_IN_LT (1<<4) /* Only update existing when new scores are lower. */
/* Output flags. */
#define ZADD_OUT_NOP (1<<0) /* Operation not performed because of conditionals.*/
#define ZADD_OUT_NAN (1<<1) /* Only touch elements already existing. */
#define ZADD_OUT_ADDED (1<<2) /* The element was new and was added. */
#define ZADD_OUT_UPDATED (1<<3) /* The element already existed, score updated. */
/* Struct to hold an inclusive/exclusive range spec by score comparison. */
typedef struct {
double min, max;
int minex, maxex; /* are min or max exclusive? */
} zrangespec;
/* Struct to hold an inclusive/exclusive range spec by lexicographic comparison. */
typedef struct {
sds min, max; /* May be set to shared.(minstring|maxstring) */
int minex, maxex; /* are min or max exclusive? */
} zlexrangespec;
/* flags for incrCommandFailedCalls */
#define ERROR_COMMAND_REJECTED (1<<0) /* Indicate to update the command rejected stats */
#define ERROR_COMMAND_FAILED (1<<1) /* Indicate to update the command failed stats */
zskiplist *zslCreate(void);
void zslFree(zskiplist *zsl);
zskiplistNode *zslInsert(zskiplist *zsl, double score, sds ele);
unsigned char *zzlInsert(unsigned char *zl, sds ele, double score);
int zslDelete(zskiplist *zsl, double score, sds ele, zskiplistNode **node);
zskiplistNode *zslFirstInRange(zskiplist *zsl, zrangespec *range);
zskiplistNode *zslLastInRange(zskiplist *zsl, zrangespec *range);
double zzlGetScore(unsigned char *sptr);
void zzlNext(unsigned char *zl, unsigned char **eptr, unsigned char **sptr);
void zzlPrev(unsigned char *zl, unsigned char **eptr, unsigned char **sptr);
unsigned char *zzlFirstInRange(unsigned char *zl, zrangespec *range);
unsigned char *zzlLastInRange(unsigned char *zl, zrangespec *range);
unsigned long zsetLength(const robj *zobj);
void zsetConvert(robj *zobj, int encoding);
void zsetConvertToListpackIfNeeded(robj *zobj, size_t maxelelen, size_t totelelen);
int zsetScore(robj *zobj, sds member, double *score);
unsigned long zslGetRank(zskiplist *zsl, double score, sds o);
int zsetAdd(robj *zobj, double score, sds ele, int in_flags, int *out_flags, double *newscore);
long zsetRank(robj *zobj, sds ele, int reverse);
int zsetDel(robj *zobj, sds ele);
robj *zsetDup(robj *o);
void genericZpopCommand(client *c, robj **keyv, int keyc, int where, int emitkey, long count, int use_nested_array, int reply_nil_when_empty, int *deleted);
sds lpGetObject(unsigned char *sptr);
int zslValueGteMin(double value, zrangespec *spec);
int zslValueLteMax(double value, zrangespec *spec);
void zslFreeLexRange(zlexrangespec *spec);
int zslParseLexRange(robj *min, robj *max, zlexrangespec *spec);
unsigned char *zzlFirstInLexRange(unsigned char *zl, zlexrangespec *range);
unsigned char *zzlLastInLexRange(unsigned char *zl, zlexrangespec *range);
zskiplistNode *zslFirstInLexRange(zskiplist *zsl, zlexrangespec *range);
zskiplistNode *zslLastInLexRange(zskiplist *zsl, zlexrangespec *range);
int zzlLexValueGteMin(unsigned char *p, zlexrangespec *spec);
int zzlLexValueLteMax(unsigned char *p, zlexrangespec *spec);
int zslLexValueGteMin(sds value, zlexrangespec *spec);
int zslLexValueLteMax(sds value, zlexrangespec *spec);
/* Core functions */
int getMaxmemoryState(size_t *total, size_t *logical, size_t *tofree, float *level);
size_t freeMemoryGetNotCountedMemory();
int overMaxmemoryAfterAlloc(size_t moremem);
int processCommand(client *c);
int processPendingCommandAndInputBuffer(client *c);
void setupSignalHandlers(void);
void removeSignalHandlers(void);
int createSocketAcceptHandler(socketFds *sfd, aeFileProc *accept_handler);
int changeListenPort(int port, socketFds *sfd, aeFileProc *accept_handler);
int changeBindAddr(void);
struct redisCommand *lookupSubcommand(struct redisCommand *container, sds sub_name);
struct redisCommand *lookupCommand(robj **argv, int argc);
struct redisCommand *lookupCommandBySdsLogic(dict *commands, sds s);
struct redisCommand *lookupCommandBySds(sds s);
struct redisCommand *lookupCommandByCStringLogic(dict *commands, const char *s);
struct redisCommand *lookupCommandByCString(const char *s);
struct redisCommand *lookupCommandOrOriginal(robj **argv, int argc);
int commandCheckExistence(client *c, sds *err);
int commandCheckArity(client *c, sds *err);
void startCommandExecution();
int incrCommandStatsOnError(struct redisCommand *cmd, int flags);
void call(client *c, int flags);
void alsoPropagate(int dbid, robj **argv, int argc, int target);
void propagatePendingCommands();
void redisOpArrayInit(redisOpArray *oa);
void redisOpArrayFree(redisOpArray *oa);
void forceCommandPropagation(client *c, int flags);
void preventCommandPropagation(client *c);
void preventCommandAOF(client *c);
void preventCommandReplication(client *c);
void slowlogPushCurrentCommand(client *c, struct redisCommand *cmd, ustime_t duration);
void updateCommandLatencyHistogram(struct hdr_histogram** latency_histogram, int64_t duration_hist);
int prepareForShutdown(int flags);
void replyToClientsBlockedOnShutdown(void);
int abortShutdown(void);
void afterCommand(client *c);
int mustObeyClient(client *c);
#ifdef __GNUC__
void _serverLog(int level, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
#else
void _serverLog(int level, const char *fmt, ...);
#endif
void serverLogRaw(int level, const char *msg);
void serverLogFromHandler(int level, const char *msg);
void usage(void);
void updateDictResizePolicy(void);
int htNeedsResize(dict *dict);
void populateCommandTable(void);
void resetCommandTableStats(dict* commands);
void resetErrorTableStats(void);
void adjustOpenFilesLimit(void);
void incrementErrorCount(const char *fullerr, size_t namelen);
void closeListeningSockets(int unlink_unix_socket);
void updateCachedTime(int update_daylight_info);
void resetServerStats(void);
void activeDefragCycle(void);
unsigned int getLRUClock(void);
unsigned int LRU_CLOCK(void);
const char *evictPolicyToString(void);
struct redisMemOverhead *getMemoryOverheadData(void);
void freeMemoryOverheadData(struct redisMemOverhead *mh);
void checkChildrenDone(void);
int setOOMScoreAdj(int process_class);
void rejectCommandFormat(client *c, const char *fmt, ...);
void *activeDefragAlloc(void *ptr);
robj *activeDefragStringOb(robj* ob, long *defragged);
void dismissSds(sds s);
void dismissMemory(void* ptr, size_t size_hint);
void dismissMemoryInChild(void);
#define RESTART_SERVER_NONE 0
#define RESTART_SERVER_GRACEFULLY (1<<0) /* Do proper shutdown. */
#define RESTART_SERVER_CONFIG_REWRITE (1<<1) /* CONFIG REWRITE before restart.*/
int restartServer(int flags, mstime_t delay);
/* Set data type */
robj *setTypeCreate(sds value);
int setTypeAdd(robj *subject, sds value);
int setTypeRemove(robj *subject, sds value);
int setTypeIsMember(robj *subject, sds value);
setTypeIterator *setTypeInitIterator(robj *subject);
void setTypeReleaseIterator(setTypeIterator *si);
int setTypeNext(setTypeIterator *si, sds *sdsele, int64_t *llele);
sds setTypeNextObject(setTypeIterator *si);
int setTypeRandomElement(robj *setobj, sds *sdsele, int64_t *llele);
unsigned long setTypeRandomElements(robj *set, unsigned long count, robj *aux_set);
unsigned long setTypeSize(const robj *subject);
void setTypeConvert(robj *subject, int enc);
robj *setTypeDup(robj *o);
/* Hash data type */
#define HASH_SET_TAKE_FIELD (1<<0)
#define HASH_SET_TAKE_VALUE (1<<1)
#define HASH_SET_COPY 0
void hashTypeConvert(robj *o, int enc);
void hashTypeTryConversion(robj *subject, robj **argv, int start, int end);
int hashTypeExists(robj *o, sds key);
int hashTypeDelete(robj *o, sds key);
unsigned long hashTypeLength(const robj *o);
hashTypeIterator *hashTypeInitIterator(robj *subject);
void hashTypeReleaseIterator(hashTypeIterator *hi);
int hashTypeNext(hashTypeIterator *hi);
void hashTypeCurrentFromListpack(hashTypeIterator *hi, int what,
unsigned char **vstr,
unsigned int *vlen,
long long *vll);
sds hashTypeCurrentFromHashTable(hashTypeIterator *hi, int what);
void hashTypeCurrentObject(hashTypeIterator *hi, int what, unsigned char **vstr, unsigned int *vlen, long long *vll);
sds hashTypeCurrentObjectNewSds(hashTypeIterator *hi, int what);
robj *hashTypeLookupWriteOrCreate(client *c, robj *key);
robj *hashTypeGetValueObject(robj *o, sds field);
int hashTypeSet(robj *o, sds field, sds value, int flags);
robj *hashTypeDup(robj *o);
/* Pub / Sub */
int pubsubUnsubscribeAllChannels(client *c, int notify);
int pubsubUnsubscribeShardAllChannels(client *c, int notify);
void pubsubUnsubscribeShardChannels(robj **channels, unsigned int count);
int pubsubUnsubscribeAllPatterns(client *c, int notify);
int pubsubPublishMessage(robj *channel, robj *message, int sharded);
int pubsubPublishMessageAndPropagateToCluster(robj *channel, robj *message, int sharded);
void addReplyPubsubMessage(client *c, robj *channel, robj *msg);
int serverPubsubSubscriptionCount();
int serverPubsubShardSubscriptionCount();
/* Keyspace events notification */
void notifyKeyspaceEvent(int type, char *event, robj *key, int dbid);
int keyspaceEventsStringToFlags(char *classes);
sds keyspaceEventsFlagsToString(int flags);
/* Configuration */
/* Configuration Flags */
#define MODIFIABLE_CONFIG 0 /* This is the implied default for a standard
* config, which is mutable. */
#define IMMUTABLE_CONFIG (1ULL<<0) /* Can this value only be set at startup? */
#define SENSITIVE_CONFIG (1ULL<<1) /* Does this value contain sensitive information */
#define DEBUG_CONFIG (1ULL<<2) /* Values that are useful for debugging. */
#define MULTI_ARG_CONFIG (1ULL<<3) /* This config receives multiple arguments. */
#define HIDDEN_CONFIG (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
#define PROTECTED_CONFIG (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
#define DENY_LOADING_CONFIG (1ULL<<6) /* This config is forbidden during loading. */
#define ALIAS_CONFIG (1ULL<<7) /* For configs with multiple names, this flag is set on the alias. */
#define MODULE_CONFIG (1ULL<<8) /* This config is a module config */
#define INTEGER_CONFIG 0 /* No flags means a simple integer configuration */
#define MEMORY_CONFIG (1<<0) /* Indicates if this value can be loaded as a memory value */
#define PERCENT_CONFIG (1<<1) /* Indicates if this value can be loaded as a percent (and stored as a negative int) */
#define OCTAL_CONFIG (1<<2) /* This value uses octal representation */
/* Enum Configs contain an array of configEnum objects that match a string with an integer. */
typedef struct configEnum {
char *name;
int val;
} configEnum;
/* Type of configuration. */
typedef enum {
BOOL_CONFIG,
NUMERIC_CONFIG,
STRING_CONFIG,
SDS_CONFIG,
ENUM_CONFIG,
SPECIAL_CONFIG,
} configType;
void loadServerConfig(char *filename, char config_from_stdin, char *options);
void appendServerSaveParams(time_t seconds, int changes);
void resetServerSaveParams(void);
struct rewriteConfigState; /* Forward declaration to export API. */
void rewriteConfigRewriteLine(struct rewriteConfigState *state, const char *option, sds line, int force);
void rewriteConfigMarkAsProcessed(struct rewriteConfigState *state, const char *option);
int rewriteConfig(char *path, int force_write);
void initConfigValues();
void removeConfig(sds name);
sds getConfigDebugInfo();
int allowProtectedAction(int config, client *c);
/* Module Configuration */
typedef struct ModuleConfig ModuleConfig;
int performModuleConfigSetFromName(sds name, sds value, const char **err);
int performModuleConfigSetDefaultFromName(sds name, const char **err);
void addModuleBoolConfig(const char *module_name, const char *name, int flags, void *privdata, int default_val);
void addModuleStringConfig(const char *module_name, const char *name, int flags, void *privdata, sds default_val);
void addModuleEnumConfig(const char *module_name, const char *name, int flags, void *privdata, int default_val, configEnum *enum_vals);
void addModuleNumericConfig(const char *module_name, const char *name, int flags, void *privdata, long long default_val, int conf_flags, long long lower, long long upper);
void addModuleConfigApply(list *module_configs, ModuleConfig *module_config);
int moduleConfigApplyConfig(list *module_configs, const char **err, const char **err_arg_name);
int getModuleBoolConfig(ModuleConfig *module_config);
int setModuleBoolConfig(ModuleConfig *config, int val, const char **err);
sds getModuleStringConfig(ModuleConfig *module_config);
int setModuleStringConfig(ModuleConfig *config, sds strval, const char **err);
int getModuleEnumConfig(ModuleConfig *module_config);
int setModuleEnumConfig(ModuleConfig *config, int val, const char **err);
long long getModuleNumericConfig(ModuleConfig *module_config);
int setModuleNumericConfig(ModuleConfig *config, long long val, const char **err);
/* db.c -- Keyspace access API */
int removeExpire(redisDb *db, robj *key);
void deleteExpiredKeyAndPropagate(redisDb *db, robj *keyobj);
void propagateDeletion(redisDb *db, robj *key, int lazy);
int keyIsExpired(redisDb *db, robj *key);
long long getExpire(redisDb *db, robj *key);
void setExpire(client *c, redisDb *db, robj *key, long long when);
int checkAlreadyExpired(long long when);
robj *lookupKeyRead(redisDb *db, robj *key);
robj *lookupKeyWrite(redisDb *db, robj *key);
robj *lookupKeyReadOrReply(client *c, robj *key, robj *reply);
robj *lookupKeyWriteOrReply(client *c, robj *key, robj *reply);
robj *lookupKeyReadWithFlags(redisDb *db, robj *key, int flags);
robj *lookupKeyWriteWithFlags(redisDb *db, robj *key, int flags);
robj *objectCommandLookup(client *c, robj *key);
robj *objectCommandLookupOrReply(client *c, robj *key, robj *reply);
int objectSetLRUOrLFU(robj *val, long long lfu_freq, long long lru_idle,
long long lru_clock, int lru_multiplier);
#define LOOKUP_NONE 0
#define LOOKUP_NOTOUCH (1<<0) /* Don't update LRU. */
#define LOOKUP_NONOTIFY (1<<1) /* Don't trigger keyspace event on key misses. */
#define LOOKUP_NOSTATS (1<<2) /* Don't update keyspace hits/misses counters. */
#define LOOKUP_WRITE (1<<3) /* Delete expired keys even in replicas. */
void dbAdd(redisDb *db, robj *key, robj *val);
int dbAddRDBLoad(redisDb *db, sds key, robj *val);
void dbOverwrite(redisDb *db, robj *key, robj *val);
#define SETKEY_KEEPTTL 1
#define SETKEY_NO_SIGNAL 2
#define SETKEY_ALREADY_EXIST 4
#define SETKEY_DOESNT_EXIST 8
void setKey(client *c, redisDb *db, robj *key, robj *val, int flags);
robj *dbRandomKey(redisDb *db);
int dbSyncDelete(redisDb *db, robj *key);
int dbDelete(redisDb *db, robj *key);
robj *dbUnshareStringValue(redisDb *db, robj *key, robj *o);
#define EMPTYDB_NO_FLAGS 0 /* No flags. */
#define EMPTYDB_ASYNC (1<<0) /* Reclaim memory in another thread. */
#define EMPTYDB_NOFUNCTIONS (1<<1) /* Indicate not to flush the functions. */
long long emptyData(int dbnum, int flags, void(callback)(dict*));
long long emptyDbStructure(redisDb *dbarray, int dbnum, int async, void(callback)(dict*));
void flushAllDataAndResetRDB(int flags);
long long dbTotalServerKeyCount();
redisDb *initTempDb(void);
void discardTempDb(redisDb *tempDb, void(callback)(dict*));
int selectDb(client *c, int id);
void signalModifiedKey(client *c, redisDb *db, robj *key);
void signalFlushedDb(int dbid, int async);
void scanGenericCommand(client *c, robj *o, unsigned long cursor);
int parseScanCursorOrReply(client *c, robj *o, unsigned long *cursor);
int dbAsyncDelete(redisDb *db, robj *key);
void emptyDbAsync(redisDb *db);
size_t lazyfreeGetPendingObjectsCount(void);
size_t lazyfreeGetFreedObjectsCount(void);
void lazyfreeResetStats(void);
void freeObjAsync(robj *key, robj *obj, int dbid);
void freeReplicationBacklogRefMemAsync(list *blocks, rax *index);
/* API to get key arguments from commands */
#define GET_KEYSPEC_DEFAULT 0
#define GET_KEYSPEC_INCLUDE_NOT_KEYS (1<<0) /* Consider 'fake' keys as keys */
#define GET_KEYSPEC_RETURN_PARTIAL (1<<1) /* Return all keys that can be found */
int getKeysFromCommandWithSpecs(struct redisCommand *cmd, robj **argv, int argc, int search_flags, getKeysResult *result);
keyReference *getKeysPrepareResult(getKeysResult *result, int numkeys);
int getKeysFromCommand(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int doesCommandHaveKeys(struct redisCommand *cmd);
int getChannelsFromCommand(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int doesCommandHaveChannelsWithFlags(struct redisCommand *cmd, int flags);
void getKeysFreeResult(getKeysResult *result);
int sintercardGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int zunionInterDiffGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int zunionInterDiffStoreGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int evalGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int functionGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int sortGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int sortROGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int migrateGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int georadiusGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int xreadGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int lmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int blmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int zmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int bzmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int setGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int bitfieldGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
unsigned short crc16(const char *buf, int len);
/* Sentinel */
void initSentinelConfig(void);
void initSentinel(void);
void sentinelTimer(void);
const char *sentinelHandleConfiguration(char **argv, int argc);
void queueSentinelConfig(sds *argv, int argc, int linenum, sds line);
void loadSentinelConfigFromQueue(void);
void sentinelIsRunning(void);
void sentinelCheckConfigFile(void);
void sentinelCommand(client *c);
void sentinelInfoCommand(client *c);
void sentinelPublishCommand(client *c);
void sentinelRoleCommand(client *c);
/* redis-check-rdb & aof */
int redis_check_rdb(char *rdbfilename, FILE *fp);
int redis_check_rdb_main(int argc, char **argv, FILE *fp);
int redis_check_aof_main(int argc, char **argv);
/* Scripting */
void scriptingInit(int setup);
int ldbRemoveChild(pid_t pid);
void ldbKillForkedSessions(void);
int ldbPendingChildren(void);
sds luaCreateFunction(client *c, robj *body);
void luaLdbLineHook(lua_State *lua, lua_Debug *ar);
void freeLuaScriptsAsync(dict *lua_scripts);
void freeFunctionsAsync(functionsLibCtx *lib_ctx);
int ldbIsEnabled();
void ldbLog(sds entry);
void ldbLogRedisReply(char *reply);
void sha1hex(char *digest, char *script, size_t len);
unsigned long evalMemory();
dict* evalScriptsDict();
unsigned long evalScriptsMemory();
typedef struct luaScript {
uint64_t flags;
robj *body;
} luaScript;
/* Blocked clients */
void processUnblockedClients(void);
void blockClient(client *c, int btype);
void unblockClient(client *c);
void queueClientForReprocessing(client *c);
void replyToBlockedClientTimedOut(client *c);
int getTimeoutFromObjectOrReply(client *c, robj *object, mstime_t *timeout, int unit);
void disconnectAllBlockedClients(void);
void handleClientsBlockedOnKeys(void);
void signalKeyAsReady(redisDb *db, robj *key, int type);
void blockForKeys(client *c, int btype, robj **keys, int numkeys, long count, mstime_t timeout, robj *target, struct blockPos *blockpos, streamID *ids);
void updateStatsOnUnblock(client *c, long blocked_us, long reply_us, int had_errors);
void scanDatabaseForDeletedStreams(redisDb *emptied, redisDb *replaced_with);
/* timeout.c -- Blocked clients timeout and connections timeout. */
void addClientToTimeoutTable(client *c);
void removeClientFromTimeoutTable(client *c);
void handleBlockedClientsTimeout(void);
int clientsCronHandleTimeout(client *c, mstime_t now_ms);
/* expire.c -- Handling of expired keys */
void activeExpireCycle(int type);
void expireSlaveKeys(void);
void rememberSlaveKeyWithExpire(redisDb *db, robj *key);
void flushSlaveKeysWithExpireList(void);
size_t getSlaveKeyWithExpireCount(void);
/* evict.c -- maxmemory handling and LRU eviction. */
void evictionPoolAlloc(void);
#define LFU_INIT_VAL 5
unsigned long LFUGetTimeInMinutes(void);
uint8_t LFULogIncr(uint8_t value);
unsigned long LFUDecrAndReturn(robj *o);
#define EVICT_OK 0
#define EVICT_RUNNING 1
#define EVICT_FAIL 2
int performEvictions(void);
void startEvictionTimeProc(void);
/* Keys hashing / comparison functions for dict.c hash tables. */
uint64_t dictSdsHash(const void *key);
uint64_t dictSdsCaseHash(const void *key);
int dictSdsKeyCompare(dict *d, const void *key1, const void *key2);
int dictSdsKeyCaseCompare(dict *d, const void *key1, const void *key2);
void dictSdsDestructor(dict *d, void *val);
void *dictSdsDup(dict *d, const void *key);
/* Git SHA1 */
char *redisGitSHA1(void);
char *redisGitDirty(void);
uint64_t redisBuildId(void);
char *redisBuildIdString(void);
/* Commands prototypes */
void authCommand(client *c);
void pingCommand(client *c);
void echoCommand(client *c);
void commandCommand(client *c);
void commandCountCommand(client *c);
void commandListCommand(client *c);
void commandInfoCommand(client *c);
void commandGetKeysCommand(client *c);
void commandGetKeysAndFlagsCommand(client *c);
void commandHelpCommand(client *c);
void commandDocsCommand(client *c);
void setCommand(client *c);
void setnxCommand(client *c);
void setexCommand(client *c);
void psetexCommand(client *c);
void getCommand(client *c);
void getexCommand(client *c);
void getdelCommand(client *c);
void delCommand(client *c);
void unlinkCommand(client *c);
void existsCommand(client *c);
void setbitCommand(client *c);
void getbitCommand(client *c);
void bitfieldCommand(client *c);
void bitfieldroCommand(client *c);
void setrangeCommand(client *c);
void getrangeCommand(client *c);
void incrCommand(client *c);
void decrCommand(client *c);
void incrbyCommand(client *c);
void decrbyCommand(client *c);
void incrbyfloatCommand(client *c);
void selectCommand(client *c);
void swapdbCommand(client *c);
void randomkeyCommand(client *c);
void keysCommand(client *c);
void scanCommand(client *c);
void dbsizeCommand(client *c);
void lastsaveCommand(client *c);
void saveCommand(client *c);
void bgsaveCommand(client *c);
void bgrewriteaofCommand(client *c);
void shutdownCommand(client *c);
void slowlogCommand(client *c);
void moveCommand(client *c);
void copyCommand(client *c);
void renameCommand(client *c);
void renamenxCommand(client *c);
void lpushCommand(client *c);
void rpushCommand(client *c);
void lpushxCommand(client *c);
void rpushxCommand(client *c);
void linsertCommand(client *c);
void lpopCommand(client *c);
void rpopCommand(client *c);
void lmpopCommand(client *c);
void llenCommand(client *c);
void lindexCommand(client *c);
void lrangeCommand(client *c);
void ltrimCommand(client *c);
void typeCommand(client *c);
void lsetCommand(client *c);
void saddCommand(client *c);
void sremCommand(client *c);
void smoveCommand(client *c);
void sismemberCommand(client *c);
void smismemberCommand(client *c);
void scardCommand(client *c);
void spopCommand(client *c);
void srandmemberCommand(client *c);
void sinterCommand(client *c);
void sinterCardCommand(client *c);
void sinterstoreCommand(client *c);
void sunionCommand(client *c);
void sunionstoreCommand(client *c);
void sdiffCommand(client *c);
void sdiffstoreCommand(client *c);
void sscanCommand(client *c);
void syncCommand(client *c);
void flushdbCommand(client *c);
void flushallCommand(client *c);
void sortCommand(client *c);
void sortroCommand(client *c);
void lremCommand(client *c);
void lposCommand(client *c);
void rpoplpushCommand(client *c);
void lmoveCommand(client *c);
void infoCommand(client *c);
void mgetCommand(client *c);
void monitorCommand(client *c);
void expireCommand(client *c);
void expireatCommand(client *c);
void pexpireCommand(client *c);
void pexpireatCommand(client *c);
void getsetCommand(client *c);
void ttlCommand(client *c);
void touchCommand(client *c);
void pttlCommand(client *c);
void expiretimeCommand(client *c);
void pexpiretimeCommand(client *c);
void persistCommand(client *c);
void replicaofCommand(client *c);
void roleCommand(client *c);
void debugCommand(client *c);
void msetCommand(client *c);
void msetnxCommand(client *c);
void zaddCommand(client *c);
void zincrbyCommand(client *c);
void zrangeCommand(client *c);
void zrangebyscoreCommand(client *c);
void zrevrangebyscoreCommand(client *c);
void zrangebylexCommand(client *c);
void zrevrangebylexCommand(client *c);
void zcountCommand(client *c);
void zlexcountCommand(client *c);
void zrevrangeCommand(client *c);
void zcardCommand(client *c);
void zremCommand(client *c);
void zscoreCommand(client *c);
void zmscoreCommand(client *c);
void zremrangebyscoreCommand(client *c);
void zremrangebylexCommand(client *c);
void zpopminCommand(client *c);
void zpopmaxCommand(client *c);
void zmpopCommand(client *c);
void bzpopminCommand(client *c);
void bzpopmaxCommand(client *c);
void bzmpopCommand(client *c);
void zrandmemberCommand(client *c);
void multiCommand(client *c);
void execCommand(client *c);
void discardCommand(client *c);
void blpopCommand(client *c);
void brpopCommand(client *c);
void blmpopCommand(client *c);
void brpoplpushCommand(client *c);
void blmoveCommand(client *c);
void appendCommand(client *c);
void strlenCommand(client *c);
void zrankCommand(client *c);
void zrevrankCommand(client *c);
void hsetCommand(client *c);
void hsetnxCommand(client *c);
void hgetCommand(client *c);
void hmgetCommand(client *c);
void hdelCommand(client *c);
void hlenCommand(client *c);
void hstrlenCommand(client *c);
void zremrangebyrankCommand(client *c);
void zunionstoreCommand(client *c);
void zinterstoreCommand(client *c);
void zdiffstoreCommand(client *c);
void zunionCommand(client *c);
void zinterCommand(client *c);
void zinterCardCommand(client *c);
void zrangestoreCommand(client *c);
void zdiffCommand(client *c);
void zscanCommand(client *c);
void hkeysCommand(client *c);
void hvalsCommand(client *c);
void hgetallCommand(client *c);
void hexistsCommand(client *c);
void hscanCommand(client *c);
void hrandfieldCommand(client *c);
void configSetCommand(client *c);
void configGetCommand(client *c);
void configResetStatCommand(client *c);
void configRewriteCommand(client *c);
void configHelpCommand(client *c);
void hincrbyCommand(client *c);
void hincrbyfloatCommand(client *c);
void subscribeCommand(client *c);
void unsubscribeCommand(client *c);
void psubscribeCommand(client *c);
void punsubscribeCommand(client *c);
void publishCommand(client *c);
void pubsubCommand(client *c);
void spublishCommand(client *c);
void ssubscribeCommand(client *c);
void sunsubscribeCommand(client *c);
void watchCommand(client *c);
void unwatchCommand(client *c);
void clusterCommand(client *c);
void restoreCommand(client *c);
void migrateCommand(client *c);
void askingCommand(client *c);
void readonlyCommand(client *c);
void readwriteCommand(client *c);
int verifyDumpPayload(unsigned char *p, size_t len, uint16_t *rdbver_ptr);
void dumpCommand(client *c);
void objectCommand(client *c);
void memoryCommand(client *c);
void clientCommand(client *c);
void helloCommand(client *c);
void evalCommand(client *c);
void evalRoCommand(client *c);
void evalShaCommand(client *c);
void evalShaRoCommand(client *c);
void scriptCommand(client *c);
void fcallCommand(client *c);
void fcallroCommand(client *c);
void functionLoadCommand(client *c);
void functionDeleteCommand(client *c);
void functionKillCommand(client *c);
void functionStatsCommand(client *c);
void functionListCommand(client *c);
void functionHelpCommand(client *c);
void functionFlushCommand(client *c);
void functionRestoreCommand(client *c);
void functionDumpCommand(client *c);
void timeCommand(client *c);
void bitopCommand(client *c);
void bitcountCommand(client *c);
void bitposCommand(client *c);
void replconfCommand(client *c);
void waitCommand(client *c);
void georadiusbymemberCommand(client *c);
void georadiusbymemberroCommand(client *c);
void georadiusCommand(client *c);
void georadiusroCommand(client *c);
void geoaddCommand(client *c);
void geohashCommand(client *c);
void geoposCommand(client *c);
void geodistCommand(client *c);
void geosearchCommand(client *c);
void geosearchstoreCommand(client *c);
void pfselftestCommand(client *c);
void pfaddCommand(client *c);
void pfcountCommand(client *c);
void pfmergeCommand(client *c);
void pfdebugCommand(client *c);
void latencyCommand(client *c);
void moduleCommand(client *c);
void securityWarningCommand(client *c);
void xaddCommand(client *c);
void xrangeCommand(client *c);
void xrevrangeCommand(client *c);
void xlenCommand(client *c);
void xreadCommand(client *c);
void xgroupCommand(client *c);
void xsetidCommand(client *c);
void xackCommand(client *c);
void xpendingCommand(client *c);
void xclaimCommand(client *c);
void xautoclaimCommand(client *c);
void xinfoCommand(client *c);
void xdelCommand(client *c);
void xtrimCommand(client *c);
void lolwutCommand(client *c);
void aclCommand(client *c);
void lcsCommand(client *c);
void quitCommand(client *c);
void resetCommand(client *c);
void failoverCommand(client *c);
#if defined(__GNUC__)
void *calloc(size_t count, size_t size) __attribute__ ((deprecated));
void free(void *ptr) __attribute__ ((deprecated));
void *malloc(size_t size) __attribute__ ((deprecated));
void *realloc(void *ptr, size_t size) __attribute__ ((deprecated));
#endif
/* Debugging stuff */
void _serverAssertWithInfo(const client *c, const robj *o, const char *estr, const char *file, int line);
void _serverAssert(const char *estr, const char *file, int line);
#ifdef __GNUC__
void _serverPanic(const char *file, int line, const char *msg, ...)
__attribute__ ((format (printf, 3, 4)));
#else
void _serverPanic(const char *file, int line, const char *msg, ...);
#endif
void serverLogObjectDebugInfo(const robj *o);
void sigsegvHandler(int sig, siginfo_t *info, void *secret);
const char *getSafeInfoString(const char *s, size_t len, char **tmp);
dict *genInfoSectionDict(robj **argv, int argc, char **defaults, int *out_all, int *out_everything);
void releaseInfoSectionDict(dict *sec);
sds genRedisInfoString(dict *section_dict, int all_sections, int everything);
sds genModulesInfoString(sds info);
void applyWatchdogPeriod();
void watchdogScheduleSignal(int period);
void serverLogHexDump(int level, char *descr, void *value, size_t len);
int memtest_preserving_test(unsigned long *m, size_t bytes, int passes);
void mixDigest(unsigned char *digest, const void *ptr, size_t len);
void xorDigest(unsigned char *digest, const void *ptr, size_t len);
sds catSubCommandFullname(const char *parent_name, const char *sub_name);
void commandAddSubcommand(struct redisCommand *parent, struct redisCommand *subcommand, const char *declared_name);
void populateCommandMovableKeys(struct redisCommand *cmd);
void debugDelay(int usec);
void killIOThreads(void);
void killThreads(void);
void makeThreadKillable(void);
void swapMainDbWithTempDb(redisDb *tempDb);
/* Use macro for checking log level to avoid evaluating arguments in cases log
* should be ignored due to low level. */
#define serverLog(level, ...) do {\
if (((level)&0xff) < server.verbosity) break;\
_serverLog(level, __VA_ARGS__);\
} while(0)
/* TLS stuff */
void tlsInit(void);
void tlsCleanup(void);
int tlsConfigure(redisTLSContextConfig *ctx_config);
int isTlsConfigured(void);
#define redisDebug(fmt, ...) \
printf("DEBUG %s:%d > " fmt "\n", __FILE__, __LINE__, __VA_ARGS__)
#define redisDebugMark() \
printf("-- MARK %s:%d --\n", __FILE__, __LINE__)
int iAmMaster(void);
#define STRINGIFY_(x) #x
#define STRINGIFY(x) STRINGIFY_(x)
#endif